Sony DSC-T2/P Instruction Manual - Page 12

2 Inserting the battery pack Battery/"Memory Stick Duo" cover Open Close Battery eject lever Align the v mark of the battery slot with the v mark on the side of the battery pack. Press and hold the battery eject lever and insert the battery pack. 1Open the battery/"Memory Stick Duo" cover. 2Insert the battery pack. 3Close the battery/"Memory Stick Duo" cover. [ To check the remaining battery charge Press POWER button to turn on and check the remaining battery charge on the LCD screen. Remaining charge indicator Status Sufficient power remaining Battery almost fully charged Battery half full Battery low, recording/ playback will stop soon. Change the battery with fully charged one, or charge the battery. (The warning indicator flashes.) • If the NP-FD1 battery pack (not supplied) is used, the minute display ( 60 Min) is also shown after the battery remaining indicator. • It takes about one minute until the correct remaining charge indicator appears. • The remaining charge indicator may not be correct depending on conditions of use and circumstances. • The Clock Set screen appears when you turn on the camera for the first time (page 14). 12