Sony DSLR-A580 Instruction Manual (Large File - 11.45 MB) - Page 38
Select [Cleaning Mode] with, Select [Enter]
View all Sony DSLR-A580 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Cleaning the image sensor If dust or debris enters the camera and lands on the image sensor (the part that acts as the film), it may appear on the photo image, depending on the shooting environment. If there is dust on the image sensor, use a commercially available blower and clean the image sensor following the steps below. You can easily clean the image sensor using only the blower and the anti-dust function. Notes • Cleaning can be performed only when the battery level is 50% or more. • Low battery power during cleaning can cause damage to the shutter. The cleaning should be completed quickly. The use of an AC-PW10AM AC Adaptor (sold separately) is recommended. • Do not use a spray blower because it may scatter water droplets inside the camera body. 1 Confirm that the battery is fully charged (page 23). 2 Press the MENU button, then select 2 with b/B on the controller. MENU button 3 Select [Cleaning Mode] with v/V, then press the center of the controller. 4 Select [Enter] with v, and press the center of the controller. After the image sensor vibrates for a short time, the mirror in front is lifted. 5 Detach the lens (page 26). 38