Sony DSX-A30 Operating Instructions - Page 12
USB devices
View all Sony DSX-A30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
USB devices • MSC (Mass Storage Class)-type USB devices compliant with the USB standard can be used. • Backup of data in a USB device is recommended. • MSC (Mass Storage Class)-type Android™ Phone compliant with the USB standard can be used. Depending on the Android Phone, setting the USB connection mode to MSC is required. (Complete this setting within 20 seconds after connecting the device. Otherwise the unit cannot recognize the device.) Notes • Connect the USB device after starting the engine. Depending on the USB device, malfunction or damage may occur if it is connected before starting the engine. • Corresponding codec is MP3 (.mp3), WMA (.wma) and AAC (.m4a). • For details on the compatibility of your USB device, visit the support site on the back cover. Playing back a USB device 1 Open the USB cover, then connect the USB device to the USB port. Playback starts. If a USB device is already connected, to start playback, press repeatedly until "USB" appears. To stop playback, press and hold for 1 second. To remove the USB device, stop the USB playback, then remove the USB device. Notes • Do not use USB devices so large or heavy that they may fall down due to vibration, or cause a loose connection. • Do not detach the front panel during playback of the USB device, otherwise USB data may be damaged. Changing display items Press Displayed items may differ depending on the USB device, recording format and settings. 12