Sony DSX-GS900 Operating Instructions - Page 14
Installation, Mounting the unit with an installation kit, not supplied, Using the wired remote control
View all Sony DSX-GS900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Using the wired remote control When using the steering wheel remote control Installation of the connection cable RC-SR1 (not supplied) is required before use. 1 To enable the steering wheel remote control, select [STEERING] [EDIT CUSTOM] to make the registration. When the registration completes, the steering wheel remote control becomes available. Notes on installing the connection cable RC-SR1 (not supplied) Refer to the support sites on the back cover for details, then connect each lead properly to the appropriate leads. Making an improper connection may damage the unit. Depending on the type of car, be sure to insulate the unused leads with electrical tape for safety. Do not connect this cable when the steering wheel remote control is not used. Consulting the dealer or an experienced technician for help is recommended. When using the wired remote control 1 To enable the wired remote control, set [STRG CTRL] in [STEERING] to [PRESET]. Installation Mounting the unit in the dashboard For Japanese cars, see "Mounting the unit in a Japanese car" (page 15). CAUTION Do not touch the left side of the unit when removing from the dashboard. The heatsink on the left side of the unit remains hot right after use. Mounting the unit with an installation kit (not supplied) You can use a commercially available double DIN installation kit. Choose an installation kit with the following panel frame size. Larger than 172 mm × 97 mm (6 7/8 in × 3 7/8 in) (w/ h), with an inner corner radius of less than 0.5 mm (1/32 in). Note Be sure to use the mounting screws . To dashboard/center console Larger than 97 mm (3 7/8 in) Larger than 172 mm (6 7/8 in) Installation kit (not supplied) 14GB