Sony DSX-GS900 Operating Instructions - Page 6

Basic Operations Pairing with a BLUETOOTH Device When connecting a BLUETOOTH device for the first time, mutual registration (called "pairing") is required. Pairing enables this unit and other devices to recognize each other. This unit can connect two BLUETOOTH devices (two mobile phones, or a mobile phone and an audio device). 1 Press MENU, then rotate and press the control dial to select [BLUETOOTH]  [PAIRING]  [DEVICE 1]/[DEVICE 2]*. flashes while the unit is in pairing standby mode. * [DEVICE 1] or [DEVICE 2] will be changed to the paired device name after pairing is complete. 2 Perform pairing on the BLUETOOTH device so it detects this unit. 3 Select your model name shown in the display of the BLUETOOTH device*. When pairing is made, stays lit. * If passkey input is required on the BLUETOOTH device, input [0000]. Updating the Firmware To update the firmware, visit the support site on the back cover, then follow the online instructions. Note During the update, do not remove the USB device. Initializing the Unit Initializing the unit will erase the clock settings and all your settings stored in the backup memory. [INITIALIZE] appears only while the source is off and the clock is displayed. 1 Press MENU, rotate the control dial to select [GENERAL], then press it. 2 Rotate the control dial to select [INITIALIZE], then press it. 3 Rotate the control dial to select [INIT-YES], then press it. Note Initialize the unit before discarding the unit to prevent the leakage of phone information. Canceling the Demonstration Mode You can cancel the demonstration display which appears when the source is off and the clock is displayed. 1 Press MENU, rotate the control dial to select [GENERAL], then press it. 2 Rotate the control dial to select [DEMO], then press it. 3 Rotate the control dial to select [DEMO-OFF], then press it. The setting is complete. 4 Press (back) twice. The display returns to normal reception/play mode. 6GB