Sony DSX-GS900 Help Guide - Page 58
RRB ENHANCE rear bass enhancer
View all Sony DSX-GS900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Item SUBW POS (subwoofer position) Detail [NEAR] (near), [NORMAL] (normal), [FAR] (far) (Available only when [F/R POS] is set to other than [OFF].) DSO (dynamic stage organizer) Creates a more ambient sound as if there were speakers in the dashboard: [OFF], [LOW], [MID], [HIGH]. (Automatically sets to [OFF] when [CLR AUDIO+] is set to [ON].) BALANCE (balance) Adjusts the sound balance: [RIGHT-15] - [CENTER] - [LEFT-15]. FADER (fader) Adjusts the relative level: [FRONT-15] - [CENTER] - [REAR-15]. DSEE (digital sound enhancement engine) Improves digitally compressed sound by restoring high frequencies lost in the compression process: [ON], [OFF]. This setting can be memorized for each source other than the radio. AAV (advanced auto volume) Adjusts the playback volume level of all playback sources to the optimum level: [ON], [OFF]. RRB ENHANCE (rear bass enhancer) Enhances the bass sound by applying a low pass filter setting to the rear speakers. This function allows the rear speakers to work as a subwoofer if one is not connected. (Available only when [SUBW DIRECT] is set to [OFF].) Item Detail RBE MODE (rear bass enhancer mode) Selects the rear bass enhancer mode: [1], [2], [3], [OFF]. LPF FREQ (low pass filter frequency) Selects the subwoofer cut-off frequency: [50Hz], [60Hz], [80Hz], [100Hz], [120Hz]. LPF SLOPE (low pass filter slope) Selects the LPF slope: [1], [2], [3]. SUBW DIRECT (subwoofer direct connection) Adjusts the settings for the subwoofer connected to the rear speaker lead without a power amplifier. (Available only when [RBE MODE] is set to [OFF].) Be sure to connect a 2 Ω or 4 Ω to 8 Ω subwoofer to either of the rear speaker leads. When using a 2 Ω subwoofer, set [SPKR LOAD] to [2 OHM]. Do not connect a speaker to the other rear speaker lead. 58