Sony DSX-M50BT Operating Instructions 1 - Page 11
Connecting with a paired, BLUETOOTH device, Select [Sony Automotive] shown - bluetooth pairing
View all Sony DSX-M50BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
2 Press CALL, rotate the control dial to select [PAIRING], then press it. flashes. The unit enters pairing standby mode. 3 Perform pairing on the BLUETOOTH device so it detects this unit. 4 Select [Sony Automotive] shown in the display of the BLUETOOTH device. If [Sony Automotive] does not appear, repeat from step 2. Note While connecting to a BLUETOOTH device, this unit cannot be detected from another device. To enable detection, enter the pairing mode and search for this unit from another device. To cancel pairing Perform step 2 to cancel the pairing mode after this unit and the BLUETOOTH device are paired. Connecting with a paired BLUETOOTH device To use a paired device, connection with this unit is required. Some paired devices will connect automatically. 5 If passkey* input is required on the BLUETOOTH device, input [0000]. * Passkey may be called "passcode," "PIN code," "PIN number" or "Password," etc., depending on the device. Input passkey [0000] When pairing is made, stays lit. 6 Select this unit on the BLUETOOTH device to establish the BLUETOOTH connection. or lights up when the connection is made. 1 Press CALL, rotate the control dial to select [BT SIGNL], then press it. Make sure that lights up. 2 Activate the BLUETOOTH function on the BLUETOOTH device. 3 Operate the BLUETOOTH device to connect to this unit. or lights up. Icons in the display: Lights up when a cellular phone is connected to the unit. Lights up when an audio device is connected to the unit. 11GB