Sony DSX-M50BT Operating Instructions 1 - Page 13
Listening to the Radio, Using Radio Data System (RDS)
View all Sony DSX-M50BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Listening to the Radio Listening to the Radio Tuning step setting is required (page 10). To listen to the radio, press SOURCE to select [TUNER]. Storing automatically (BTM) 1 Press MODE to change the band. 2 Press and hold SELECT (FM1, FM2, FM3, AM1 or AM2). The setup display appears. 3 Rotate the control dial to select [BTM], then press it. The unit stores stations in order of frequency on the number buttons. Tuning 1 Press MODE to change the band (FM1, FM2, FM3, AM1 or AM2). 2 Perform tuning. To tune manually Press and hold SEEK +/- to locate the approximate frequency, then press SEEK +/- repeatedly to fine adjust to the desired frequency. To tune automatically Press SEEK +/-. Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received. Storing manually 1 While receiving the station that you want to store, press and hold a number button (1 to 6) until [MEM] appears. Receiving the stored stations 1 Select the band, then press a number button (1 to 6). Using Radio Data System (RDS) Selecting program types (PTY) Use PTY to display or search for a desired program type. 1 Press PTY during FM reception. 2 Rotate the control dial until the desired program type appears, then press it. The unit starts to search for a station broadcasting the selected program type. 13GB