Sony DVP-NS77H/S Operating Instructions - Page 59

Settings and Adjustments ◆ BLACK LEVEL (COMPONENT OUT) Selects the black level (setup level) for the video signals output from the COMPONENT VIDEO OUT jacks. You cannot select this when the player outputs progressive signals (page 19). OFF ON Sets the black level of the output signal to the standard level. Normally, select this position. Raises the standard black level. Use this setting when the picture appears too dark. ◆ 4:3 OUTPUT This setting is effective only when you set "TV TYPE" in "SCREEN SETUP" to "16:9." Adjust this to watch 4:3 aspect ratio. If you can change the aspect ratio on your TV, change the setting on your TV, not the player. FULL NORMAL Select this when you can change the aspect ratio on your TV. Select this when you cannot change the aspect ratio on your TV. Shows a 16:9 aspect ratio signal with black bands on left and right sides of the image. 16:9 aspect ratio TV Custom Settings (CUSTOM SETUP) Use this to set up playback related and other settings. Select "CUSTOM SETUP" in the Setup Display. To use the display, see "Using the Setup Display" (page 55). The default settings are underlined. CUSTOM SETUP AUTO POWER OFF: AUTO PLAY: DIMMER: PAUSE MODE: TRACK SELECTION: MULTI-DISC RESUME: HDMI CONTROL: LANGUAGE FOLLOW: OFF OFF BRIGHT AUTO OFF ON OFF ON ◆ AUTO POWER OFF Switches the Auto Power Off setting on or off. OFF ON Switches this function off. The player enters standby mode when left in stop mode for more than 30 minutes. ◆ AUTO PLAY Switches the Auto Play setting on or off. This function is useful when the player is connected to a timer (not supplied). OFF ON Switches this function off. Automatically starts playback when the player is turned on by a timer (not supplied). ◆ DIMMER Adjusts the lighting of the front panel display. BRIGHT Makes the lighting bright. DARK Makes the lighting dark. AUTO DARK Makes the lighting dark if you do not operate the player or remote for a short while. ,continued 59US