Sony DVPNS36S Operating Instructions - Page 20
LINE RGB-TV jack
View all Sony DVPNS36S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
7 Press X/x to select the setting that matches your TV type. ◆ If you have a wide-screen TV or a 4:3 standard TV with a wide-screen mode • 16:9 (page 63) ◆ If you have a 4:3 standard TV • 4:3 LETTER BOX or 4:3 PAN SCAN (page 63) 8 Press ENTER. The Setup Display for selecting the type of video signal output from the LINE (RGB)-TV jack appears. SCREEN SETUP TV TYPE: SCREEN SAVER: BACKGROUND: LINE: 16:9 ON JACKET PICTURE VIDEO VIDEO S VIDEO RGB 9 Press X/x to select the type of signal you want to output from the LINE (RGB)-TV jack. ◆ Video signals • VIDEO (page 63) ◆ S video signals • S VIDEO (page 63) ◆ RGB signals • RGB (page 63) 10Press ENTER. The Setup Display for selecting the type of jack used to connect your amplifier (receiver) appears. Is this player connected to an amplifier (receiver) ? Select the type of jack you are using. YES LINE OUTPUT L/R (AUDIO) DIGITAL OUTPUT NO 11Press X/x to select the type of jack (if any) you are using to connect to an amplifier (receiver), then press ENTER. If you did not connect an AV amplifier (receiver), select "NO," then go to step 15. If you connected an AV amplifier (receiver) using just an audio cord, select "YES: LINE OUTPUT L/R (AUDIO)," then go to step 15. If you connected an AV amplifier (receiver) using coaxial digital cord, select "YES: DIGITAL OUTPUT." 12Press X/x to select the type of Dolby Digital signal you wish to send to your amplifier (receiver). If your AV amplifier (receiver) has a Dolby Digital decoder, select "DOLBY DIGITAL." Otherwise, select "D-PCM." AUDIO SETUP AUDIO ATT: OFF AUDIO DRC: STANDARD DOWNMIX: DOLBY SURROUND DIGITAL OUT: ON DOLBY DIGITAL: D-PCM MPEG: D-PCM DTS: DOLBY DIGITAL 48kHz/96kHz PCM: 48kHz/16bit 13Press ENTER. "DTS" is selected. AUDIO SETUP AUDIO ATT: OFF AUDIO DRC: STANDARD DOWNMIX: DOLBY SURROUND DIGITAL OUT: ON DOLBY DIGITAL: D-PCM MPEG: PCM DTS: OFF 48kHz/96kHz PCM: OFF ON 14Press X/x to select whether or not you wish to send a DTS signal to your amplifier (receiver). If your AV amplifier (receiver) has a DTS decoder, select "ON." Otherwise, select "OFF." 20