Sony DVPNS36S Operating Instructions - Page 65
L1 - Settings for the Sound (AUDIO SETUP), AUDIO ATT attenuation, AUDIO DRC Dynamic Range Control
View all Sony DVPNS36S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Settings for the Sound (AUDIO SETUP) "AUDIO SETUP" allows you to set the sound according to the playback and connection conditions. Select "AUDIO SETUP" in the Setup Display. To use the display, see "Using the Setup Display" (page 61). The default settings are underlined. AUDIO SETUP AUDIO ATT: OFF AUDIO DRC: STANDARD DOWNMIX: DOLBY SURROUND DIGITAL OUT: ON DOLBY DIGITAL: D-PCM MPEG: PCM DTS: OFF 48kHz/96kHz PCM: 48kHz/16bit ◆ AUDIO ATT (attenuation) If the playback sound is distorted, set this item to "ON." The player reduces the audio output level. This function affects the output of the following jacks: - LINE OUT L/R (AUDIO) jacks - LINE (RGB)-TV jack OFF Normally, select this position. ON Select this when the playback sound from the speakers is distorted. ◆ DOWNMIX (DVD VIDEO/DVD-VR mode only) Switches the method for mixing down to 2 channels when you play a DVD which has rear sound elements (channels) or is recorded in Dolby Digital format. For details on the rear signal components, see "Checking the audio signal format" (page 40). This function affects the output of the following jacks: - LINE OUT L/R (AUDIO) jacks - LINE (RGB)-TV jack - DIGITAL OUT (COAXIAL) jack when "DOLBY DIGITAL" is set to "D-PCM" (page 66). DOLBY SURROUND Normally, select this position. Multi-channel audio signals are output to 2 channels for enjoying surround sounds. NORMAL Multi-channel audio signals are downmixed to 2 channels for use with your stereo. ◆ DIGITAL OUT Selects if audio signals are output via the DIGITAL OUT (COAXIAL) jack. ON OFF Normally select this position. When you select "ON," see "Setting the digital output signal" for further settings (page 66). The influence of the digital circuit upon the analog circuit is minimal. ◆ AUDIO DRC (Dynamic Range Control) (DVD VIDEO/DVD-VR mode only) Makes the sound clear when the volume is turned down when playing a DVD that conforms to "AUDIO DRC." This function affects the output from the following jacks: - LINE OUT L/R (AUDIO) jacks - LINE (RGB)-TV jack - DIGITAL OUT (COAXIAL) jack only when "DOLBY DIGITAL" is set to "DPCM" (page 66). STANDARD Normally select this position. TV MODE Makes low sounds clear even if you turn the volume down. WIDE RANGE Gives you the feeling of being at a live performance. Settings and Adjustments ,continued 65