Sony DVWM2000P Product Manual (Operation Manual 1st Edition (Revised 6)) - Page 50
To synchronize the internal time code, generator to an external signal, TCG F1, VITC, TCR
View all Sony DVWM2000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
4-1 Recording Chapter 4 Recording and Playback To synchronize the internal time code generator to an external signal Use this method to synchronize the time code generators of a number of VTRs, or to record the playback time code signal from an external VTR without deterioration of the signal waveform. In this case the RUN and DF settings are ignored. You can synchronize the internal time code generator to either of the following external time codes. • The time code output (LTC) of an external time code generator or external VTR connected to the TIME CODE IN connector of the unit • The time code (VITC) present in a video signal input to the unit • The time code (SMPTE RP188) present in an SDI signal input to the unit To synchronize the internal time code generator to an external signal, use the following procedure. Z TIME CODE IN OUT 1 1,2 2 Perform the following settings in function menu page 1. • When synchronizing to an external time code output (LTC) or the time code (VITC) in an input video signal: TCG (F1): EXT TCG (F2): REGEN VITC: ON (when recording VITC) TCR: LTC or VITC according as you are synchronizing to LTC or VITC (If set to AUTO, LTC is used.) • When synchronizing to the time code (SMPTE RP188) in an SDI signal: TCG (F1): RP188 TCG (F2), VITC, TCR: Any setting Note When the TCG (F1) is set to RP188, when settings of the TCG (F1) and VID.IN conflict with each other, or when the input signal selected with the VID.IN is not present, the TCG (F1) setting display flashes. This starts the internal time code generator running in synchronization with the external time code generator. Once the internal time code generator is synchronized with the external time code generator, even if the external time code generator connection is removed, the internal time code generator continues to run. TIME CODE IN connector 1 • When synchronizing to an external time code output (LTC): Connect the time code output of the external time code generator or external VTR to the TIME CODE IN connector. • When synchronizing to the time code (VITC) in an input video signal: With the VID.IN in function menu HOME page, select an input video signal containing VITC. • When synchronizing to the time code (SMPTE RP188) in an SDI signal: With the VID.IN in function menu HOME page, select SDI. 4-4 Chapter 4 Recording and Playback