Sony ECM-B1M Help Guide - Page 12

Notes on use

Get Sony ECM-B1M PDF manuals and user guides View all Sony ECM-B1M manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Help Guide Shotgun Microphone ECM-B1M Notes on use To protect the connector of the Multi Interface foot from damage while carrying around this unit, remove the unit from the camera, attach the connector protect cap to the foot and put the unit in the supplied case. While recording is in progress, operation and handling noises of a camera or a lens may be recorded. Touching this unit while recording is in progress causes a noise to be including in the recording. Monitoring or recording voice with the microphone of a camera may cause a slight delay of the voice. Before changing the lens, make sure that no wind screen fibers are present on the surface of the lens and the camera body. If present, clean them off with a blower etc. and then change the lens. If dust or water droplets are present on the surface of the microphone, a successful recording may not be possible. Be sure to clean the microphone surface before using this unit. 5-007-783-11(1) Copyright 2019 Sony Corporation 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
Help Guide
Shotgun Microphone
ECM-B1M
Notes on use
To protect the connector of the Multi Interface foot from damage while carrying around this unit, remove the unit from
the camera, attach the connector protect cap to the foot and put the unit in the supplied case.
While recording is in progress, operation and handling noises of a camera or a lens may be recorded. Touching this
unit while recording is in progress causes a noise to be including in the recording.
Monitoring or recording voice with the microphone of a camera may cause a slight delay of the voice.
Before changing the lens, make sure that no wind screen fibers are present on the surface of the lens and the
camera body. If present, clean them off with a blower etc. and then change the lens.
If dust or water droplets are present on the surface of the microphone, a successful recording may not be possible.
Be sure to clean the microphone surface before using this unit.
5-007-783-11(1) Copyright 2019 Sony Corporation
12