Sony FW-75BZ40L Wall-Mount Bracket: 3rd Party - Page 12

Note • Be sure to fasten the Wall-Mount Attachment when attaching them to the LCD Display. Use only a flat head screwdriver to install the Wall-Mount Attachment. Use of another tool might result in over torqueing the Wall-Mount Attachment and damaging the LCD Display. 3 Attach the Wall-Mount Bracket (not supplied) using the screws (not supplied). Wall-Mount Bracket (not supplied) 4 Detaching the Table-Top Stand from the LCD Display.  Remove one side of the Table-Top Stand at a time. Firmly hold the Table-Top Stand securely with both hands while the other people lift up the LCD Display. Screw (not supplied) When using an electric screwdriver, set the torque setting to approximately 1.5 N·m {15 kgf·cm}. Do not lift the Wall-Mount Bracket (not supplied) before the screws (two screws each for left/right) are secured. This may distort the Wall-Mount Bracket or the LCD Display cabinet.  Repeat the previous step and remove the other side of the Table-Top Stand. Note • Three or more people are required to detach the Table-Top Stand. • Be careful not to use excessive force while detaching the Table-Top Stand from the LCD Display as it may cause the LCD Display set to fall resulting in personal injury or physical damage to the LCD Display. • Take care when handling the Table-Top Stand to prevent damage to the LCD Display. • Be careful when lifting the LCD Display as the TableTop Stand is detached, the Table-Top Stand may topple over and cause personal injury. • Take care when removing the Table-Top Stand from the LCD Display to prevent it from falling over and damaging the surface that the LCD Display is sitting on. 12 (EN)