Sony FW-75BZ40L Wall-Mount Bracket: 3rd Party - Page 7

2 Attach the Wall-Mount Attachment (supplied with the LCD Display) to the rear of the LCD Display (to make it parallel with the wall). Supplied with the LCD Display VS Wall-Mount Attachment (4) When using an electric screwdriver, set the torque setting to approximately 1.5 N·m {15 kgf·cm}. Do not lift the Wall-Mount Bracket (not supplied) before the screws (two screws each for left/right) are secured. This may distort the Wall-Mount Bracket or the LCD Display cabinet. Installing the LCD Display to the Wall from Table-Top Stand* * Only for limited region/country/model. 1 Remove the screws from the rear of the LCD Display. VS 1.5 N·m {15 kgf·cm} Note • Be sure to fasten the Wall-Mount Attachment when attaching them to the LCD Display. Use only a flat head screwdriver to install the Wall-Mount Attachment. Use of another tool might result in over torqueing the Wall-Mount Attachment and damaging the LCD Display. 3 Attach the Wall-Mount Bracket (not supplied) using the screws (not supplied). Wall-Mount Bracket (not supplied) 2 Attach the Wall-Mount Attachment (supplied with the LCD Display) to the rear of the LCD Display (to make it parallel with the wall). Supplied with the LCD Display VS Wall-Mount Attachment (4) Screw (not supplied) VS 1.5 N·m {15 kgf·cm} 7 (EN)