Sony HCD-HDX678WF Operating Instructions - Page 112
Surround amplifier TA-SA100WR DAV, HDX578W/DAV-HDX678WF/DAV, HDX975WF only
View all Sony HCD-HDX678WF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Surround amplifier (TA-SA100WR) (DAV- HDX578W/DAV-HDX678WF/DAV- HDX975WF only) AUDIO POWER SPECIFICATIONS for the US model POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 3 ohms loads, both channels driven, from 120 - 20,000 Hz; rated 50 watts per channel minimum RMS power, with no more than 0.7% total harmonic distortion from 250 milli watts to rated output. Amplifier Section US models: Surround mode (reference) RMS output power: 143W (per channel at 3 ohms, 1 kHz, 10 % THD) Other models: Stereo mode (rated) 80 W + 80 W (at 3 ohms, 1 kHz, 1 % THD) Surround mode (reference) RMS output power 143 W (per channel at 3 ohms, 1 kHz, 10 % THD)* * Depending on the source, there may be no sound output. Rated impedance: 3 - 16 Ω General Power requirements Power consumption Dimensions (approx.) Mass (approx.) 120 V AC, 60 Hz On: 50 W 85 mm × 100 mm × 330 mm (3 3/8 in × 4 in × 13 in) (w/h/d) (incl. EZW-RT10) 85 mm × 100 mm × 345 mm (3 3/8 in × 4 in × 13 5/8 in) (w/h/d) incl. speaker cord cover and speaker cord holder 1.7 kg (3 lb 12 oz) incl. speaker cord cover and speaker cord holder Wireless transceiver (EZW-RT10) Communication system S-AIR Specification version 1.0 Output 12.0 mW Frequency band 2.4000 GHz - 2.4835 GHz Modulation method DSSS Power requirements DC 3.3 V, 350 mA Dimensions (approx.) 50 mm × 13 mm × 60 mm (2 in × 17/32 in × 2 3/8 in) (w/ h/d) Mass (approx.) 24 g (1 oz) Design and specifications are subject to change without notice. • Standby power consumption 0.3 W. • Halogenated flame retardants are not used in the printed wiring boards. • Over 85% power efficiency of amplifier block is achieved with the full digital amplifier, S-master. 112US