Sony HCD-HP7 Operating Instructions - Page 7
Inserting two R6 size AA, batteries into the remote, Attaching the speaker pads, Getting Started - model
View all Sony HCD-HP7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Getting Started 3 For models with a voltage selector, set VOLTAGE SELECTOR to the local power line voltage. Refer to the print on your system's VOLTAGE SELECTOR for available settings. Attaching the speaker pads Attach the supplied front speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping. Front speaker (Left (4)/Right (4)) 4 Connect the power cord to a wall outlet. The demonstration appears in the display. When you press ?/1, the system turns on and the demonstration automatically ends. If the plug does not fit the wall socket, detach the supplied plug adaptor (only for models equipped with an adaptor). Inserting two R6 (size AA) batteries into the remote When carrying this system Perform the following procedure to protect the CD mechanism. 1 Make sure that all discs are removed from the system. 2 Press ?/1 to turn off the system. "STANDBY" flashes for a few seconds, and then disappears from the display. 3 Unplug the power cord. e E E e Note If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. Tip With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. 7GB