Sony HCD-ZX6 Operating Instructions - Page 31
Changing the power illuminator, Changing the spectrum analyzer display, SPECTRUM 1
View all Sony HCD-ZX6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Changing the power illuminator You can select the power illuminator as you want. Press ILLUMINATION repeatedly to select the power illuminator you want when the system is turned on. Each time you press the button, the power illuminator changes cyclically as follows: PATTERN 1 t PATTERN 2 t PATTERN 3 t PATTERN 4 t PATTERN OFF When X-ROUND mode is selected (FST-ZX8/LBT-ZX8 only) Each time you press the button, the power illuminator changes cyclically as follows: X-PATTERN* y PATTERN OFF * The power illuminator will synchronize with the selected X-ROUND effect. Notes • When you turn VOLUME +/- (or press VOLUME +/- on the remote), power illuminator shows the current volume level. • During the demonstration display, you can turn on or off power illuminator by pressing ILLUMINATION. Changing the spectrum analyzer display 1 Press AMP MENU repeatedly to select "SPECTRUM". The last selected spectrum appears in the display. 2 Press < or , repeatedly to select the setting you want. The display changes as follows: SPECTRUM 1T t SPECTRUM 2 Y SPECTRUM OFF Y SPECTRUM 3 R t SPECTRUM 4 T R When X-ROUND mode is selected (FST-ZX8/LBT-ZX8 only) The display changes as follows: X-POSITION* y SPECTRUM OFF * The spectrum analyzer display will synchronize with the selected X-ROUND effect. 3 Press ENTER. Display 31GB