Sony HCD-ZX6 Operating Instructions - Page 9
Inserting two R6 size AA, batteries into the remote, Getting Started - model
View all Sony HCD-ZX6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Getting Started Tip Connect the speaker cords to the terminals on the speakers. Black (#) Black (#) Red (3) Red (3) 2 Connect the surround speakers. (FST-ZX8/LBT-ZX8 only) Connect the speaker cords to the SURROUND SPEAKER (SPEAKER B) terminals and to the terminals on the speakers as shown in the tip above. SRPS(SUEPREARAKOKEURENBRD) L Grey L R (SPFERAOKNERT A) 3 Connect the FM and AM antennas. Set up the AM loop antenna, then connect it. 4 For models equipped with a voltage selector, set VOLTAGE SELECTOR to the position of your local power line voltage. VOLTAGE SELECTOR 220V 120V 230-240V 5 Connect the power cord to a wall outlet. The demonstration appears in the display. When you press ?/1, the system turns on and the demonstration automatically ends. Notes • Keep the speaker cords away from the antennas to prevent noise. • Be sure to match the color of the speaker terminals on the system and the connectors. • Be sure to connect the speakers securely and correctly. Inserting two R6 (size AA) batteries into the remote e E E e AM loop antenna AM FCOMA7X5IAL Note If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. Tip With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. Extend the FM lead antenna horizontally continued 9GB