Sony HDRFX1E Operating Instructions - Page 14
Using an outside power source, Step 3: Turning the power
UPC - 411378010834
View all Sony HDRFX1E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
• The CHG (charge) lamp flashes during charging, or the battery information will not be correctly displayed in following conditions. - The battery pack is not attached correctly. - The battery pack is damaged. - The battery pack is fully discharged. (For Battery information only.) Using an outside power source You can use the AC Adaptor as the power source when you do not want the battery to run out. While you are using the AC Adaptor, the battery pack will not lose its charge even when it is attached to your camcorder. PRECAUTION Even if your camcorder is turned off, AC power (mains) is still supplied to it while connected to the wall socket via the AC Adaptor. Step 3: Turning the power on You need to set the POWER switch to the respective power mode to record or play back pictures. When using this camcorder for the first time, the [CLOCK SET] screen appears (p. 16). While pressing the green button, set the POWER switch. The power turns on. Connect your camcorder as shown in "Step 2: Charging the battery pack" (p. 11). • CAMERA: To record pictures. • VCR: To play or edit pictures. To turn off the power Set the POWER switch to OFF (CHG). 14 Getting started