Sony HDRFX1E Operating Instructions - Page 35
To reset the picture profile settings, other picture profiles
UPC - 411378010834
View all Sony HDRFX1E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Item Adjustment [SKINTONE DTL] To make wrinkles less noticeable by suppressing the outlines on the part of skin color to be enhanced. [TYPE1] (the color range recognized as a skin color is narrow) to [TYPE3] (the color range recognized as a skin color is wide) In the case of [TYPE3], the effect may also be applied to a color that is not a skin color. [OFF]: no adjustment [AE SHIFT] -7 (darker) to +7 (lighter) [AGC LIMIT] Select the upper limit for the Auto Gain Control (AGC) ([OFF], 12dB, 6dB, 0dB). [OFF] is 18dB. [AT IRIS LMT] Select the highest aperture value for the automatic adjustment (F11, F6.8, F4). [WB SHIFT] -7 (to make white parts bluish) to +7 (to make white parts reddish) [AWB SENS] To set the auto white balance operation under a reddish light source such as an incandescent lamp or candle, or under a blueish light source such as in outdoor shade. [HIGH] (reddishness or blueishness is reduced) to [LOW] (reddishness or blueishness is increased) [AWB SENS] is not effective under a clear sky or the sun. [CINEMATONE γ] [ON]: Pictures are recorded with the gamma curve that reproduces the natural gradation sequence, similar to that of film cameras. [CINEFRAME] [CINEFRAME 25]: Pictures are recorded with a cinema-like atmosphere. [OFF]: normal recording [COPY] To copy a picture profile setting to other picture profiles. [RESET] To restore the default setting of the picture profile. 6 Repeat steps 4 and 5 to adjust other items. 7 Select [ RETURN] by turning the SEL/PUSH EXEC dial, then press the dial. 8 Select [OK] by turning the SEL/PUSH EXEC dial, then press the dial. A picture profile indicator appears. To cancel the picture profile recording Select [OFF] in step 2, then press the SEL/ PUSH EXEC dial. To check the picture profile settings During recording or in the standby mode, press STATUS CHECK (p. 24). To copy the picture profile setting to other picture profiles 1 Press PICTURE PROFILE. 2 Select the number of the picture profile to be copied from by turning the SEL/ PUSH EXEC dial, then press the dial. 3 Select [SETTING] by turning the SEL/ PUSH EXEC dial, then press the dial. 4 Select [COPY] by turning the SEL/ PUSH EXEC dial, then press the dial. 5 Select the number of the picture profile to be copied to by turning the SEL/PUSH EXEC dial, then press the dial. 6 Select [YES] again by turning the SEL/ PUSH EXEC dial, then press the dial. If you decide not to copy the settings, select [NO]. 7 Press PICTURE PROFILE. To reset the picture profile settings You can reset the picture profile settings by picture profile number. You cannot reset all picture profile settings at once. 1 Press PICTURE PROFILE. ,continued Recording 35 Recording