Sony HT-1300D Operating Instructions - Page 19
Step 2: Connecting the Audio Cords, Select a connection - theater system
View all Sony HT-1300D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Hookups Step 2: Connecting the Audio Cords Refer to the chart below to select the connection that best suits your system. The surround effects you will enjoy depend on the connections and components you use. Select a connection Select one of the following connections, A through D . Connection A (page 20) B (page 21) B (page 21) C (page 22) D (page 23) Components to be connected • TV (stereo) • Stereo amplifier (receiver) (having L and R audio input jacks only, or having a digital input jack) • 2 speakers (front L and R) • MD deck/DAT deck • AV amplifier (receiver) with a Dolby* Surround (Pro Logic) decoder (having L and R audio input jacks only, or having a digital input jack) • 3 speakers (front L and R, and rear (monaural)) • 6 speakers (front L and R, center, rear L and R, and subwoofer) • AV amplifier (receiver) having a Dolby Digital or DTS** decoder and a digital input jack • 6 speakers (front L and R, rear L and R, center, and subwoofer) * Manufactured under license from Dolby Laboratories. "Dolby," "Pro Logic," and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories. All rights reserved. ** "DTS" is a registered trademark of Digital Theater Systems, Inc. continued 19