Sony HT-1300D Operating Instructions - Page 66

Specifications System Laser Signal format system Semiconductor laser NTSC Audio characteristics Frequency response DVD (PCM 96 kHz): 2 Hz to 44 kHz (±1.0 dB) DVD (PCM 48 kHz): 2 Hz to 22 kHz (±0.5 dB) CD: 2 Hz to 20 kHz (±0.5 dB) Signal-to-noise ratio (S/N ratio) 115 dB (LINE OUT L/R (AUDIO) jacks 1, 2 only) Harmonic distortion 0.003 % Dynamic range DVD: 103 dB CD: 99 dB Wow and flutter Less than detected value (±0.001% W PEAK) The signals from LINE OUT L/R (AUDIO) 1/2 jacks are measured. When you play PCM sound tracks with a 96 kHz sampling frequency, the output signals from the DIGITAL OUT (COAXIAL and OPTICAL) jacks are converted to 48 kHz sampling frequency. Outputs Jack name Jack type DIGITAL OUT (OPTICAL) Optical output jack DIGITAL OUT (COAXIAL) Phono jack LINE OUT (AUDIO) (1, 2) Phono jack LINE OUT (VIDEO) (1, 2) Phono jack S VIDEO OUT 4-pin mini DIN COMPONENT VIDEO OUT (Y, PB, PR) Phono jack Maximum output level Load impedance -18 dBm Wave length: 660 nm 0.5 Vp-p 2 Vrms (50 kilohms) 1.0 Vp-p Luminance signal: 1.0 Vp-p Color signal: 0.286 Vp-p Y: 1.0 Vp-p PB, PR: 0.7 Vp-p 75 ohms terminated Over 10 kilohms 75 ohms, sync negative 75 ohms, sync negative 75 ohms terminated 75 ohms, sync negative 75 ohms terminated General Power requirements Power consumption Dimensions (approx.) Mass (approx.) Operating temperature Operating humidity Supplied accessories See page 14. 120V AC, 60 Hz 110 to 240V AC, 50/60 Hz See page 3 for further information. 12 W See page 3 for further information. 430 × 74 × 256 mm (17 × 3 × 10 1/8 in.) (width/height/depth) incl. projecting parts 2.7 kg (5 lb) 5 °C to 35 °C (41 °F to 95 °F) 25 % to 80 % Specifications and design are subject to change without notice. ENERGY STARR is a U.S. registered mark. As an ENERGY STARR Partner. Sony Corporation has determined that this product meets the ENERGY STARR guidelines for energy efficiency. 66