Sony HT-7000DH Operating Instructions (HT-7000DH)
Sony HT-7000DH - Component Home Theater System Manual
 |
View all Sony HT-7000DH manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony HT-7000DH manual content summary:
- Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 1
662-265-11 (1) DVD Home Theatre System Operating Instructions Owner's Record The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 2
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 3
HT-7000DH consists of: • Receiver STR-K7000 • DVD player DVP-NC85H • Speaker system - Front speaker SS-MSP7000 - Center speaker SS-CNP900 - Surround speaker SS-SRP7000 - Sub woofer SA-WP780 • The instructions in this manual describe the controls on the supplied remote. You can also use - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 4
location of parts 5 1: Installing speakers 14 2: Connecting speakers 16 3a: Connecting the audio components.........18 3b: Connecting the video components ........21 4: Connecting the antennas 28 5: Preparing the receiver and the remote .....29 6: Selecting the speaker system 30 7: Calibrating - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 5
Started Getting Started Description and location of parts Receiver Front panel 12 3 45 67 8 ?/1 SPEAKERS (OFF/A/B/A+B) AUTO CAL MIC PHONES VIDEO 3 IN/PORTABLE AV IN VIDEO L AUDIO R MULTI CHANNEL DECODING DISPLAY INPUT MODE INPUT SELECTOR MASTER VOLUME MEMORY/ TUNING ENTER MODE - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 6
MULTI CH IN Press to select the audio directly from the components connected to the MULTI CH IN jacks (page 35). K INPUT SELECTOR Turn to select the input jacks S AUTO CAL MIC jack Connects to the supplied ECM-AC2 optimizer microphone for the Auto Calibration function (page 31). T PHONES jack - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 7
dynamic range compression is activated (page 40). Flashes when you select "HDMI A." in the VIDEO menu (page 65). Lights up when INPUT MODE is set to "AUTO" and the source signal is a digital signal being input through the COAXIAL jack, or when INPUT MODE is set to "COAX IN" (page 64). continued 7US - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 8
Name M OPT N SLEEP O Playback channel indicators L R C SL SR S Function Lights up when INPUT MODE is set to "AUTO" and the source signal is a digital signal being input through the OPTICAL jack, or when INPUT MODE is set to "OPT IN" (page 64). Lights up when the sleep timer is activated (page 67). - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 9
R R AUDIO IN AUDIO IN AUDIO OUT AUDIO IN DVD VIDEO 2 VIDEO 1 L AUDIO CENTER OUT R SUB FRONT SURROUND WOOFER SUB MULTI CH IN WOOFER CENTER + - SPEAKERS L L + - + - R SURROUND SPEAKERS R FRONT A RL RL FRONT B SPEAKERS 6 5 A DIGITAL INPUT section OPTICAL Connects to a DVD IN jack - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 10
20). White (L) Red (R) MULTI CHANNEL INPUT jack Black Connects to a Super Audio CD player or DVD player which has an analog audio jack for 5.1 channel sound (page 19). F ANTENNA section FM ANTENNA AM ANTENNA XM Connects to the FM wire antenna supplied with this receiver (page 28). Connects to - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 11
DVD player, MD deck, or LD player (multi-disc changer only). G ALT Press to light up the button. It changes the remote receiver. Then, use the control buttons to perform menu operations. M TV/VIDEO Press to select the input signal (TV input or video input). N AUTO CAL Press to activate the Auto - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 12
Press to select the category for +/- XM Radio. DUAL MONO Press to select the language you want during digital broadcast. AUDIO Press to change the sound to Multiplex, Bilingual or Multi channel TV sound of the TV, VCR, DVD player, satellite tuner, Blu-ray disc recorder, hard disc recorder, or - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 13
you press any of the input buttons, the receiver turns on. The buttons are factory assigned to control Sony components as follows. You can program the remote to control non-Sony components following the steps in "Programming the remote" on page 69. Button Assigned Sony component VIDEO1 VCR (VTR - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 14
speakers To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a center speaker, and two surround speakers) and a sub woofer (5.1 channel). Example of a 5.1 channel speaker system configuration Installing the speakers on a flat surface Before - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 15
attach the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where reinforcement is applied. • Contact a screw shop or installer regarding the wall material or screws to be used. • Sony is not responsible for accident or damage caused by improper - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 16
HDMI MONITOR + - PB/CB /B-Y SPEAKERS VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT DVD IN PR/CR /R-Y VIDEO 2 MONITOR IN OUT L L L L L L AUDIO CENTER OUT R OUT IN MD/TAPE R R AUDIO IN AUDIO IN AUDIO OUT AUDIO IN DVD VIDEO 2 VIDEO 1 R SUB FRONT SURROUND WOOFER SUB MULTI - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 17
do not have any character on the speaker label. For details on the speaker type, see page 3. Tip Use the supplied speakers to optimize the system's performance. 17US - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 18
output 20 deck onlyb) a)Model with MULTI CH OUTPUT jacks, etc. This connection is used to output audio decoded by the component's internal multi-channel decoder through this receiver. b)Model equipped only with AUDIO OUT L/R jacks, etc. Audio input/output jack to be connected The sound quality - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 19
multi channel decoder. Note When you make connections to the MULTI CH IN jacks, you will need to adjust the level of the speakers and sub woofer using the controls on the connected component. DVD player, Super Audio CD player, etc. A B DIGITAL OPTICAL VIDEO 1 IN VIDEO 2 IN ANTENNA XM AM DVD - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 20
connect a component which has analog jacks such as tape deck, etc. Super Audio CD player/ CD player MD deck/ Tape deck A A DIGITAL OPTICAL VIDEO 1 IN VIDEO 2 IN ANTENNA XM AM DVD IN VIDEO 2 IN MONITOR OUT COMPONENT VIDEO ASSIGNABLE Y ASSIGNABLE HDMI MONITOR PB/CB /B-Y VIDEO IN VIDEO - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 21
your components, proceed to "4: Connecting the antennas" (page 28). Component to be connected Component Page TV monitor 22 DVD player/DVD recorder 23 Satellite tuner 26 With HDMI jack 25 VCR 27 Camcorder, video game, etc. 27 Video input/output jack to be connected The image quality - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 22
to a TV via the receiver. If the power supply of the receiver is not turned on, neither video nor audio is transmitted. TV monitor A B DIGITAL OPTICAL VIDEO 1 IN VIDEO 2 IN ANTENNA XM AM DVD IN VIDEO 2 IN MONITOR OUT COMPONENT VIDEO ASSIGNABLE Y ASSIGNABLE HDMI MONITOR PB/CB /B-Y VIDEO - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 23
to the jacks of your components. 1 Connecting audio DVD player Notes • To input multi channel digital audio from the DVD player, set the digital audio output setting on the DVD player. Refer to the operating instructions supplied with the DVD player. • When connecting optical digital cords - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 24
2 Connecting video DVD player A B DIGITAL OPTICAL VIDEO 1 IN VIDEO 2 IN ANTENNA XM AM DVD IN VIDEO 2 IN MONITOR OUT COMPONENT VIDEO ASSIGNABLE Y ASSIGNABLE HDMI MONITOR PB/CB /B-Y VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT DVD IN VIDEO 2 IN PR/CR /R-Y MONITOR OUT DVD IN COAXIAL - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 25
of the multi channel surround sound, be sure to - connect the digital audio jacks on the playback component to the receiver. - turn off or mute the TV's volume. DVD player Satellite tuner TV monitor, projector, etc. A A A DIGITAL OPTICAL VIDEO 1 IN VIDEO 2 IN ANTENNA XM AM DVD IN VIDEO - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 26
All the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling frequencies. Satellite tuner A B C D DIGITAL OPTICAL VIDEO 1 IN VIDEO 2 IN ANTENNA XM AM DVD IN VIDEO 2 IN MONITOR OUT COMPONENT VIDEO ASSIGNABLE Y ASSIGNABLE HDMI MONITOR PB/CB /B-Y VIDEO - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 27
with analog video and audio jack The following illustration shows how to connect a component which has analog jacks such as a VCR, etc. VCR A DIGITAL OPTICAL VIDEO 1 IN VIDEO 2 IN ANTENNA XM AM DVD IN VIDEO 2 IN MONITOR OUT COMPONENT VIDEO ASSIGNABLE Y ASSIGNABLE HDMI MONITOR PB/CB - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 28
L R R AUDIO IN AUDIO IN AUDIO OUT AUDIO IN DVD VIDEO 2 VIDEO 1 L AUDIO CENTER OUT R SUB FRONT SURROUND WOOFER SUB MULTI CH IN WOOFER CENTER + - SPEAKERS L L + - + - R SURROUND SPEAKERS R FRONT A * The shape of the connector varies depending on the area code of this receiver. Notes - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 29
outlet Note Install this system so that the power cord can be unplugged from the wall socket immediately in the event of trouble. ?/1 SPEAKERS (OFF/A/B/A+B) AUTO CAL MIC PHONES VIDEO 3 IN/PORTABLE AV IN VIDEO L AUDIO R MULTI CHANNEL DECODING DISPLAY INPUT MODE INPUT SELECTOR MASTER VOLUME - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 30
the speaker system You can select the front speakers you want to drive. Be sure to use the buttons on the receiver for this operation. ?/1 SPEAKERS (OFF/A/B/A+B) AUTO CAL MIC PHONES VIDEO 3 IN/PORTABLE AV IN VIDEO L AUDIO R MULTI CHANNEL DECODING DISPLAY INPUT MODE INPUT SELECTOR MASTER - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 31
CAL MIC PHONES VIDEO 3 IN/PORTABLE AV IN VIDEO L AUDIO R MULTI CHANNEL DECODING DISPLAY INPUT MODE INPUT SELECTOR MASTER VOLUME MEMORY/ TUNING ENTER MODE TUNING 2CH A.F.D. MOVIE MUSIC MULTI CH IN MUTING 1 1 Connect the supplied ECM-AC2 optimizer microphone to the AUTO CAL MIC jack - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 32
when you do the following during the measurement process: - Press ?/1, input buttons or MUTING. - Change the volume level. - Press AUTO CAL again. Error and warning codes Error codes When an error is detected during Auto Calibration, an error code will appear on the display cyclically after each - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 33
change the settings manually. To change the settings manually 1 Record down the warning code. 2 Press the control button. 3 Press ?/1 to turn off the receiver. 4 Follow the solution provided in the "Warning code and solution" below. 5 Turn on the receiver and perform Auto Calibration again (page - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 34
tone from your listening position. Tip The receiver employs a test tone with a frequency centered at 800 Hz. 2-5 H TOP MENU/ GUIDE X x MUTING AV MENU F G g MASTER VOL f O DISPLAY TV VOL RETURN/EXIT TV/ AMP TV CH VIDEO MENU AUTO WIDE CAL MASTER VOL +/- 1 6 Adjust the speaker levels - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 35
PORTABLE AV IN jack DVD [DVD] DVD player, etc., connected to DVD jack MD/TAPE [MD/TAPE] MD deck, tape deck, etc., connected to the MD/ TAPE jack SA-CD/CD [SA-CD/CD] Super Audio CD/CD player, etc., connected to the SA-CD/CD jack TUNER Built-in radio tuner [FM or AM band] MULTI CH Component - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 36
the rear panel of the sub woofer for this operation. 1 Press POWER. The POWER indicator lights up. 2 Turn LEVEL to adjust the volume. Set the volume level to suit your preference according to the selected input as slight adjustments may enhance the sound. Note Do not set the volume of the sub - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 37
MENU/ GUIDE X x MUTING AV MENU F G g MASTER VOL f O DISPLAY TV VOL RETURN/EXIT TV/ AMP TV CH VIDEO MENU WIDE AUTO CAL 2 3 5 ?/1 SPEAKERS (OFF/A/B/A+B) AUTO CAL MIC PHONES VIDEO 3 IN/PORTABLE AV IN VIDEO L AUDIO R MULTI CHANNEL DECODING DISPLAY INPUT MODE INPUT SELECTOR MASTER - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 38
(OFF/A/B/A+B) AUTO CAL MIC PHONES VIDEO 3 IN/PORTABLE AV IN VIDEO L AUDIO R MULTI CHANNEL DECODING DISPLAY INPUT MODE INPUT SELECTOR MASTER VOLUME MEMORY/ TUNING ENTER MODE TUNING 2CH A.F.D. MOVIE MUSIC MULTI CH IN MUTING 7 3 Notes • Refer to the operating instructions supplied - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 39
, you can make various adjustments to customize the receiver. H TOP MENU/ GUIDE X x MUTING AV MENU 2-6 F G g MASTER VOL f O DISPLAY RETURN/EXIT TV/ AMP TV VOL TV CH VIDEO MENU 1 AUTO WIDE CAL To return to the previous display Press control button B. To exit the menu Press AMP MENU - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 40
station receiving modea) AUTO PLII MV, PLII MS, PLII GM, PLIIX for: MV, PLIIX MS, PLIIX GM, NEO6 TUNER, CIN, NEO6 MUS, MULTI ST., SA-CD/CD, C.ST.EX A, C.ST.EX B, C.ST.EX C, MD/TAPE, HALL, JAZZ, CONCERT DVD, VIDEO 1, 2, 3 EFCT. MIN, EFCT. STD, EFCT. MAX EFCT. STD FM AUTO, FM MONO FM AUTO - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 41
Amplifier Operations Menu [Display] AUDIO (44) [5-AUDIO] Parameters [Display] Digital audio input decoding prioritya) [DEC. PRI.] Settings DEC. AUTO, DEC. PCM VIDEO (45) [6-VIDEO] SYSTEM (46) [7-SYSTEM] Digital broadcast language selectiona) [DUAL] DUAL M/S, DUAL M, DUAL S, DUAL M+S A/V Synca - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 42
soundtrack based on the dynamic range information included in the Dolby Digital signal. "COMP. STD" is the standard setting, but it only enacts light compression. Therefore, we recommend using the "COMP. MAX" setting. This greatly compresses the dynamic range and lets you view movies late at night - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 43
x S.F. SELCT (Sound field selection) Lets you select the sound field you want. For details, see "Enjoying Surround Sound" (page 48). Note The receiver lets you apply the last selected sound field to an input whenever it is selected (Sound Field Link). For example, if you select HALL for the SA-CD/CD - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 44
(page 39) and "Overview of the menus" (page 40). AUDIO menu parameters x DEC. PRI. (Digital audio input decoding priority) Lets you specify the input mode for the digital signal input to the DIGITAL IN jacks. • DEC. AUTO Automatically switches the input mode between DTS, Dolby Digital, or PCM. • DEC - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 45
component images from other inputs" (page 64). x HDMI A. (HDMI assign) Lets you reassign the HDMI input to another input. For details, see "Watching HDMI images from other inputs" (page 65). x NAME IN (Naming inputs) Lets you set the name of inputs. For details, see "Naming inputs" (page 66). 45US - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 46
through menus" (page 39) and "Overview of the menus" (page 40). SYSTEM menu parameters x FRT DIST. (Front speaker distance) Lets you set the a distance 15 feet closer to your listening position (D). Tip The receiver lets you to input the speaker position in terms of distance. However, it is not - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 47
corresponds to sections B and D. Tip Surround speaker position is designed specifically for implementation of the Cinema Studio EX modes. For other sound contrary to the above explanation, we recommend that you playback multi channel surround encoded software and select the setting that provides a - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 48
Enjoying Dolby Digital and DTS Surround sound (AUTO FORMAT DIRECT) The Auto Format Direct (A.F.D.) mode allows you to listen to higher fidelity sound and select the decoding mode for listening to a 2 channel stereo sound as multi channel sound. A.F.D. 2CH A.F.D. MOVIE MUSIC 1 CATEGORY 2 3 DUAL - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 49
AUTO automatically) [A.F.D. AUTO] Multi channel audio after decoding (Detecting automatically) Dolby Pro Logic PRO LOGIC [DOLBY PL] 4 channel Dolby Pro Logic PRO LOGIC II MOVIE 5 channel II [PLII MV] PRO LOGIC II MUSIC 5 channel [PLII MS] (Multi Stereo) MULTI STEREO [MULTI ST.] (Multi - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 50
by selecting one of the receiver's preprogrammed sound fields. They bring the exciting and powerful sound of movie theaters and concert halls into your home. MULTI CH 2CH A.F.D. 2CH A.F.D. MOVIE MUSIC 1 CATEGORY 2 3 DUAL CATEGORY MONO MODE 4 5 6 AUDIO ANGLE JUMP/ PRESET/ TUNING TIME - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 51
mark use DCS technology. DCS is a unique sound reproduction technology for home theater developed by Sony, in cooperation with Sony Pictures Entertainment, for enjoying the exciting and powerful sound of movie theaters at home. With this "Digital Cinema Sound" developed by integrating a DSP (Digital - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 52
." or press A.F.D. repeatedly to select "A.F.D. AUTO". Using only the front speakers and sub woofer (2CH STEREO) In this mode, the receiver outputs the sound from the front left/right speakers and the sub woofer. When multi channel surround formats are input, the signals are downmixed to 2 channel - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 53
receiver for this operation. 1,2 ?/1 SPEAKERS (OFF/A/B/A+B) AUTO CAL MIC PHONES VIDEO 3 IN/PORTABLE AV IN VIDEO L AUDIO R MULTI CHANNEL DECODING DISPLAY INPUT MODE INPUT operation, make sure you have connected the FM and AM antennas to the receiver (page 28). Tip The tuning scale is: FM : - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 54
the controls on the receiver 1 Turn INPUT SELECTOR to select the FM or AM band. 2 Press TUNING MODE repeatedly to select "AUTO T.". 3 Press TUNING + or TUNING -. In case of poor FM stereo reception If the FM stereo reception is poor and "STEREO" flashes on the display, select monaural audio so - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 55
can also use INPUT SELECTOR on the receiver. 2 Tune in the station that you want to preset using Automatic Tuning (page 54) or Direct Tuning (page 54). Switch the FM reception mode, if necessary (page 54). 3 Press MEMORY. You can also use MEMORY/ENTER on the receiver. "MEMORY" lights up for a few - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 56
ANT CLEAR SEARCH MODE H TOP MENU/ GUIDE X x MUTING AV MENU F G g MASTER VOL f O DISPLAY TV VOL RETURN/EXIT TV/ AMP TV CH VIDEO MENU AUTO WIDE CAL 1 3 1 Press TUNER repeatedly to select the FM or AM band. You can also use INPUT SELECTOR on the receiver. 2 Tune in the preset station - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 57
, entertainment, traffic and weather reports, with high quality digital sound. XM $12.95 monthly service subscription sold separately. XM Connect and Play(TM) antenna required to receive XM service (sold separately). Installation costs and other fees and taxes, including a one-time activation fee - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 58
at the following webpage: (http://www.xmradio.ca/) Connecting the XM Radio Before operating the system, connect the XM Connect-and-Play antenna to the XM jack. XM jack DIGITAL DVD OPTICAL VIDEO 1 IN ANTENNA XM A VIDEO 2 IN AM DVD IN COAXIAL L L R IN SA-CD/CD R OUT IN MD/TAPE Note - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 59
AUDIO ANGLE JUMP/ PRESET/ TUNING TIME CH/D.SKIP 7 8 9 MEMORY SUBTITLE ENTER .> 1 Press TUNER repeatedly to select the "XM RADIO". You can also use INPUT SELECTOR on the receiver. 2 Press TUNING + or TUNING - to select a channel. You can also press TUNING MODE on the receiver to select "AUTO - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 60
the receiver to select "AUTO T.", and AUDIO ANGLE JUMP/ PRESET/ TUNING TIME CH/D.SKIP 7 8 9 MEMORY SUBTITLE ENTER .> 0/10 >10/11 12 D.TUNING DISC ALT mM - ANT CLEAR SEARCH MODE H X x 4 1 Press TUNER repeatedly to select the "XM RADIO". You can also use INPUT SELECTOR on the receiver - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 61
?/1 SPEAKERS (OFF/A/B/A+B) AUTO CAL MIC PHONES VIDEO 3 IN/PORTABLE AV IN VIDEO L AUDIO R MULTI CHANNEL DECODING DISPLAY INPUT MODE INPUT SELECTOR MASTER VOLUME MEMORY/ TUNING ENTER MODE TUNING 2CH A.F.D. MOVIE MUSIC MULTI CH IN MUTING Press DISPLAY on the receiver repeatedly. Each - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 62
the selection. You can also press TUNING MODE on the receiver to select "PRESET T.", and then turn TUNING +/-. You can select preset channels from 1 to 30. Note The preset channel information will be updated depending on the service provided by the XM Satellite Radio Inc. that you have subscribed to - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 63
messages list Message appears Explanation Remedies ANTENNA The XM antenna is not Make sure that the antenna is securely connected. connected or transmission is not being received properly. UPDATING The encryption code is being Wait until the encryption code has been updated. updated. NO - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 64
audio input jacks on the receiver. 1 Turn INPUT SELECTOR on the receiver to select the input. You can also use the input buttons on the remote. 2 Press INPUT MODE repeatedly on the receiver to select the audio input mode. The selected audio input mode appears on the display. Audio input modes • AUTO - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 65
the menu. 4 Press control button V/v repeatedly to select "HDMI A.". 5 Press the control button or control button b to enter the parameter. 6 Press control button V/v repeatedly to select the HDMI input you want to reassign (for example, DVD). 7 Press the control button or control button b to enter - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 66
with HDMI jacks" (page 25). The input you can reassign to varies for each HDMI input. For details, see "Assignable inputs for HDMI input" below. To return to the previous display Press control button B. Assignable inputs for HDMI input HDMI input Assignable Display inputs DVD VIDEO 1 DVD-VD1 - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 67
applied a)Index name appears only when you have assigned one to the input or preset station (page 56, 66). Index name does not appear OFF When Sleep Timer is being used, "SLEEP" lights up on the display. Tip To check the remaining time before the receiver turns off, press ALT and then press SLEEP. - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 68
from the analog OUT jacks even when MULTI CH IN is selected. The analog audio signals of the current or previously used input are output. Recording onto a recording media You can record from a video component using the receiver. See the operating instructions supplied with your recording component - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 69
remote to control nonSony components by changing the code. Once the control signals have been memorized, you can use those components as part of your system. Furthermore, you can also program the remote for Sony components that the remote is unable to control. Note that the remote can only control - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 70
and the maker of the component Use the numeric codes in the tables below to control non-Sony components and also Sony components that the remote is normally unable to control. Since the remote signal that a component accepts differs depending on the model and year of the component, more than one - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 71
though you enter the code for AIWA, enter the code for Sony instead. To control a DVD player Maker SONY PANASONIC PHILIPS PIONEER TOSHIBA DENON Code(s) 401, 402, 403 406, 408 407 409 404 405 To control a DVD recorder Maker SONY Code(s) 403 To control a TV Maker SONY DAEWOO FISHER GOLDSTAR/LG - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 72
. The three jacks are color coded green, blue and red. x Composite video A standard format for transmitting video signal information. The luminance signal Y and chrominance signal C are combined and transmitted together. x Dolby Digital Digital audio encoding/decoding technology developed by - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 73
method for DVD-video. x DTS Digital Surround Digital audio encoding/decoding technology for theaters developed by Digital Theater Systems, Inc. It compresses audio less than Dolby Digital, delivering a higher quality sound reproduction. x HDMI (High-Definition Multimedia Interface) Technology - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 74
, panel, and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzine. If you have any questions or problems concerning your receiver, please consult your nearest Sony dealer. 74US - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 75
with the input buttons. • The protective device on the receiver has been activated. Turn off the receiver, eliminate the short-circuit problem, and turn on the power again. There is no sound from a specific component. • Check that the component is connected correctly to the audio input jacks for - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 76
source sound input to the HDMI jack on the receiver is not output from the TV speaker. • Check the HDMI connection. • You cannot listen to the Super Audio CD by connecting HDMI. • Depending on the playback component, you may need to set up the component. Refer to the operating instructions supplied - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 77
TV to the appropriate input mode. • Move your audio components away from the TV. • Assign the component video input correctly. The MULTI CHANNNEL DECODING lamp does not light up in blue. • Check that the playback component is connected to a digital jack and the input is selected properly on this - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 78
while you perform Auto Calibration, see "Error and warning codes" (page 32) to solve the problem. DEC. EROR Appears when a signal the receiver cannot decode (ex. DTS-CD) is input and "DEC. PRI." on the AUDIO menu is set to "DEC. PCM". Set it to "DEC. AUTO" (page 41). PROTECT Irregular current is - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 79
Inputs (Digital) DVD (Coaxial) VIDEO 1, 2 (Optical) Sensitivity: - Impedance: 75 ohms Sensitivity: - Impedance: - Outputs (Analog) MD/TAPE (OUT), VIDEO 1 (AUDIO OUT) SUB WOOFER Voltage: 800 mV Impedance: 10 kohms Voltage: 2 V Impedance: 1 kohm Reproduction frequency range: 28 - 20,000 Hz Tone - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 80
woofer (SA-WP780) AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL system Active subwoofer, magnetically shielded Speaker unit 200 mm cone type Enclosure type Acoustically loaded bass reflex RMS output 150 W (6 ohms, 100 Hz, THD 10%) Music power 200 W Input LINE IN (input pin jacks - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 81
antenna (1) AM loop antenna (1) Monaural audio cord (1) Speaker cords • Long (2) • Short (3) Coaxial digital cord (1) Footpads • Speakers (20) • Sub woofer (4) Remote For details on the area code of the component you are using, see page 3. Design and specifications are subject to change without - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 82
Sound (DCS) 51 Dolby Digital 72 DTS 73 DVD player hooking up 21 playback 38 DVD recorder hooking up 21 E Error messages 78 H HDMI ASSIGN 65 hooking up 21 I Initial setup 29 INPUT MODE 64 M MD deck connecting 18 Menu A. CAL 48 AUDIO 44 LEVEL 42 SUR 43 SYSTEM 46 TONE 43 TUNER 44 VIDEO 45 Muting - Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 83
- Sony HT-7000DH | Operating Instructions (HT-7000DH) - Page 84
Sony Corporation Printed in Malaysia
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
 |
 |
©2006 Sony Corporation
2-662-265-
11
(1)
DVD Home
Theatre System
Operating Instructions
Owner’s Record
The model and serial numbers are located on the rear of the unit. Record the
serial number in the space provided below. Refer to them whenever you call
upon your Sony dealer regarding this product.
Model No.
Serial No.
HT-7000DH