Sony HT-7000DH Operating Instructions (HT-7000DH) - Page 13

Getting Started Name Function wh Numeric buttons Press ALT (G) and then press the numeric buttons to - preset/tune to preset stations. - select track numbers of the CD player, VCD player, LD player, DVD player, MD deck, DAT deck, or tape deck. Press 0/10 to select track number 10. - select channel numbers of the TV, VCR, satellite tuner, Blu-ray disc recorder, hard disc recorder, or PSX. >10/11 Press ALT (G) and then press >10/11 to select track numbers over 10 of the CD player, VCD player, LD player, MD deck, tape deck, TV, VCR, Blu-ray disc recorder, hard disc recorder, PSX, or satellite tuner. wj Input buttons Press one of the buttons to select the component you want to use. When you press any of the input buttons, the receiver turns on. The buttons are factory assigned to control Sony components as follows. You can program the remote to control non-Sony components following the steps in "Programming the remote" on page 69. Button Assigned Sony component VIDEO1 VCR (VTR mode 3) VIDEO2 VCR (VTR mode 1) VIDEO3 VCR (VTR mode 2) DVD DVD player MD/TAPE MD deck SA-CD/CD Super Audio CD/CD player TUNER Built-in tuner AUX Not assigned Name Function wk TV ?/1 Press to turn the TV on or off. wl RM SET UP Press to set up the remote. a)The MASTER VOL +, TV VOL +, TV CH + and H buttons have tactile dots. Use the tactile dots as references when operating the receiver. Notes • Some functions explained in this section may not work depending on the model. • The above explanation is intended to serve as an example only. Therefore, depending on the component, the above operation may not be possible or may operate differently than described. • The 12 button on the remote is not available for receiver operation. 13US