Sony HT-7000DH Operating Instructions (HT-7000DH) - Page 67
Changing the display, Using the Sleep Timer, All inputs except the FM and AM, FM and AM band
View all Sony HT-7000DH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Changing the display You can check the sound field, etc., by changing the information on the display. Be sure to use the buttons on the receiver for this operation. Press DISPLAY repeatedly. Each time you press the button, the display changes cyclically as follows. All inputs except the FM and AM band Index name of the inputa) t Selected input t Sound field currently applied FM and AM band Preset station namea) t Frequency t Sound field currently applied a)Index name appears only when you have assigned one to the input or preset station (page 56, 66). Index name does not appear when only blank spaces have been entered, or it is the same as the input name. Using the Sleep Timer You can set the receiver to turn off automatically at a specified time. Press ALT and then press SLEEP repeatedly while the power is on. Each time you press the button, the display changes cyclically as follows: 2-00-00 t 1-30-00 t 1-00-00 t 0-30-00 t OFF When Sleep Timer is being used, "SLEEP" lights up on the display. Tip To check the remaining time before the receiver turns off, press ALT and then press SLEEP. The remaining time appears on the display. If you press SLEEP again, the sleep timer will be canceled. Other Operations 67US