Sony HT-7700DP Operating Instructions - Page 53
Specifications
View all Sony HT-7700DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 8 ohm loads, both channels driven, from 20 - 20,000 Hz; rated 90 watts per channel minimum RMS power, with no more than 0.09 % total harmonic distortion from 250 milliwatts to rated output (models of area code U only). Amplifier section POWER OUTPUT Models of area code U, CA Rated Power Output at Stereo Mode (8 ohms 20 Hz - 20 kHz, THD 0.09 %) 90 W + 90 W Reference Power Output (8 ohms 20 Hz - 20 kHz, THD 0.09 %) FRONT1): 90 W/ch CENTER1): 90 W SURR1): 90 W/ch SURR BACK1): 90 W (8 ohms 1 kHz, THD 0.7 %) FRONT1): 100 W/ch CENTER1): 100 W SURR1): 100 W/ch SURR BACK1): 100 W 1) Depending on the sound field settings and the source, there may be no sound output. Frequency response MULTI CH IN, CD/SACD, AUX, MD/TAPE, DVD, VIDEO 1, 2, 3 10 Hz - 70 kHz +0.5/-2 dB (with sound field and equalizer bypassed) Inputs (Analog) MULTI CH IN, CD/SACD, AUX, MD/TAPE, DVD, VIDEO 1, 2, 3 Sensitivity: 500 mV Impedance: 50 kilohms S/N2): 96 dB (A, 500 mV3)) 2) INPUT SHORT (with sound field and equalizer bypassed). 3) Weighted network, input level. Inputs (Digital) DVD (Coaxial) VIDEO 2, CD/SACD, MD/TAPE (Optical) Sensitivity: - Impedance: 75 ohms S/N: 100 dB (A, 20 kHz LPF) Sensitivity: - Impedance: - S/N: 100 dB (A, 20 kHz LPF) Outputs (Analog) MD/TAPE (OUT), Voltage: 500 mV VIDEO 1 (AUDIO OUT) Impedance: 10 kilohms SUB WOOFER Voltage: 2 V Impedance: 1 kilohms Outputs (Digital) MD/TAPE (Optical) Sensitivity: - EQ Gain levels: ±10 dB, 0.5 dB step continued Additional Information 53US