Sony HT-DDW820 Operating Instructions (SA-VE230 Speaker System) - Page 10

Specifications

Page 10 highlights

Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: with 6 ohm loads both channels driven, from 20 - 150 Hz; rated 50 watts per channel minimum RMS power, with no more than 0.8% total harmonic distortion from 250 milliwatts to rated output. SS-V230 Front and rear speakers Speaker system Full range, magnetically shielded Speaker units 5 × 9 cm (2 × 3 5/8 in.), cone type Enclosure type Bass reflex Rated impedance 8 ohms Power handling capacity Maximum input power: 100 watts Sensitivity level 86 dB (1 W, 1 m) Frequency range 90 Hz - 20,000 Hz Dimensions (w/h/d) Approx. 70 × 151 × 126 mm (2 7/8 × 6 × 5 in.), including front grille Mass Approx. 550 g (1 lb 3 oz) each SS-CN230 Center speaker Speaker system Full range × 2, magnetically shielded Speaker units 5 × 9 cm (2 × 3 5/8 in.), cone type Enclosure type Bass reflex Rated impedance 8 ohms Power handling capacity Maximum input power: 120 watts Sensitivity level 88 dB (1 W, 1 m) Frequency range 90 Hz - 20,000 Hz Dimensions (w/h/d) Approx. 301 × 70 × 126 mm (11 7/8 × 2 7/8 × 5 in.), including front grille Mass Approx. 1.1 kg (2 lb 7 oz) SA-WMS230 Subwoofer System Speaker system Active subwoofer, magnetically shielded Speaker unit Woofer: 16 cm (6 3/8 in.), cone type Enclosure type Advanced SAW type Continuous RMS power output (8 ohms, 20 - 150 Hz, 0.8 % THD) 50 W Reproduction frequency range 28 Hz - 200 Hz High frequency cut-off frequency 200 Hz Input LINE IN (input pin jack) General Power requirements Power consumptions Dimensions (w/h/d) Mass 120 V AC, 60 Hz 45 W Approx. 205 × 385 × 385 mm (8 1/8 × 15 1/4 × 15 1/4 in.), including front grille Approx. 10.5 kg (23 lb 2 oz) Supplied accessories Foot pads (20) Audio connecting cords (2 phono to 2 phono) (3) Monaural connecting cord (1 phono to 1 phono) (1) Speaker connecting cords, 10 m (32 ft 9 3/4 in.) (2) Speaker connecting cords, 2.5 m (8 ft 2 1/2 in.) (3) Design and specifications are subject to change without notice. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

10
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 6 ohm loads both channels driven, from
20 - 150 Hz; rated 50 watts per channel
minimum RMS power, with no more than
0.8% total harmonic distortion from
250 milliwatts to rated output.
SS-V230 Front and rear speakers
Speaker system
Full range, magnetically
shielded
Speaker units
5
×
9 cm (2
×
3
5
/
8
in.),
cone type
Enclosure type
Bass reflex
Rated impedance
8 ohms
Power handling capacity
Maximum input power:
100 watts
Sensitivity level
86 dB (1 W, 1 m)
Frequency range
90 Hz - 20,000 Hz
Dimensions (w/h/d)
Approx. 70
×
151
×
126 mm (2
7
/
8
×
6
×
5 in.),
including front grille
Mass
Approx. 550 g (1 lb 3 oz)
each
SS-CN230 Center speaker
Speaker system
Full range
×
2,
magnetically shielded
Speaker units
5
×
9 cm (2
×
3
5
/
8
in.),
cone type
Enclosure type
Bass reflex
Rated impedance
8 ohms
Power handling capacity
Maximum input power:
120 watts
Sensitivity level
88 dB (1 W, 1 m)
Frequency range
90 Hz - 20,000 Hz
Dimensions (w/h/d)
Approx. 301
×
70
×
126 mm (11
7
/
8
×
2
7
/
8
×
5 in.), including front
grille
Mass
Approx. 1.1 kg (2 lb 7 oz)
SA-WMS230 Subwoofer
System
Speaker system
Active subwoofer,
magnetically shielded
Speaker unit
Woofer:
16 cm (6
3
/
8
in.),
cone type
Enclosure type
Advanced SAW type
Continuous RMS power output
(8 ohms, 20 - 150 Hz, 0.8 % THD)
50 W
Reproduction frequency range
28 Hz - 200 Hz
High frequency cut-off frequency
200 Hz
Input
LINE IN (input pin jack)
General
Power requirements
120 V AC, 60 Hz
Power consumptions
45 W
Dimensions (w/h/d)
Approx. 205
×
385
×
385 mm (8
1
/
8
×
15
1
/
4
×
15
1
/
4
in.), including
front grille
Mass
Approx. 10.5 kg
(23 lb 2 oz)
Supplied accessories
Foot pads (20)
Audio connecting cords (2 phono to 2 phono) (3)
Monaural connecting cord (1 phono to 1 phono)
(1)
Speaker connecting cords, 10 m
(32 ft 9
3
/
4
in.) (2)
Speaker connecting cords, 2.5 m
(8 ft 2
1
/
2
in.) (3)
Design and specifications are subject to change
without notice.