Sony HT-DDW820 Operating Instructions (SA-VE230 Speaker System) - Page 5
Notes, Dolby Digital AC-3.
View all Sony HT-DDW820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Notes • Make sure the plus (+) and the minus (-) terminals on the speakers are matched to the corresponding plus (+) and minus (-) terminals on the amplifier. • Be sure to tighten the screws of the speaker terminals securely as loose screws may become a source of noise. • Make sure all connections are firm. Contact between bare speaker wires at the speaker terminals may cause a short-circuit. • Do not connect the subwoofer to the amplifier's CENTER output terminal (which is for Dolby Pro Logic or Dolby Digital (AC-3)). No bass will output from the subwoofer if you do. • For details regarding the connections on the amplifier side, refer to the manual that was provided with your amplifier. Tip All striped wires are minus (-) in polarity, and should be connected to the minus (-) speaker terminals. 5