Sony ICF-C143 Operating Instructions - Page 1

Sony ICF-C143 - Am/fm Radio With Digital Tuner Manual

Page 1 highlights

3-238-577-21(1) TV/WEATHER/FM/AM PLL Synthesized Clock Radio ICF-C153V FM/AM PLL Synthesized Clock Radio ICF-C143 Operating Instructions Manual de instrucciones (en el reverso) Dream Machine is a trademark of Sony Corporation. Dream Machine es marca comercial de Sony Corporation. Sony Corporation © 2002 Printed in China For customers in the USA Please register this product on line at http://www.sony.com/productregistration. Proper registration will enable us to send you periodic mailings about new products, services, and other important announcements. Registering your product will also allow us to contact you in the unlikely event that the product needs adjustment or modification. Thank you. ICF-C153V ICF-C143 FM wire antenna The PRESET TUNING 3 button has a tactile dot. ICF-C153V AC power cord ICF-C143 ICF-C153V VOLUME There is a tactile dot beside volume to show the direction to turn up the volume. ICF-C143 English WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Before You Begin Thank you for choosing the Sony Dream Machine. The Dream Machine will give you many hours of reliable service and listening pleasure. Before operating your unit, please read these instructions thoroughly and retain them for future reference. These instructions cover the models ICF-C153V and ICF-C143, and their difference is as follows: Model Number Band ICF-C153V TV/WEATHER/ FM/AM ICF-C143 FM/AM This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. ∗ The graphical symbols are at the bottom of the unit. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. If you have any questions about the product, you may call: Sony Direct Response Center 1-(800)-222-7669 or write to: Sony Direct Response Center 12451 Gateway Blvd. Fort Myers, FL 33913 Declaration of Conformity Trade Name: SONY Model: ICF-C153V Responsible Party: Sony Electronics Inc. Address: 680 Kinderkamack Road, Oradell, NJ 07649 USA Telephone Number: 201-930-6972 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Features • TV/WEATHER/FM/AM 4 band (ICF-C153V) or FM/AM 2 band (ICF-C143) PLL (phase locked loop) synthesized clock radio • Stand by Weather Alert call you if you set the "standby weather alert" mode (ICF-C153V only). • Easy Preset Digital Tuning with 25 memory presets for ICF-C153V, 15 memory presets for ICF-C143 • Easy nap timer -one push operation. • Dual Alarm (radio and buzzer) with the extendable snooze function. • LCD with backlight which has a brightness control switch (high/middle/low). • D.S.T. (Daylight Saving Time) -Summer time calculation Setting the Clock 1 Plug in the unit. "AM 12:00" flashes on the display. 2 Press CLOCK SET for a few seconds until a beep sounds. The hour starts to flash on the display. 3 Press TUNE/TIME SET + or - until the correct hour appears. To set the current time rapidly, hold down TUNE/TIME SET + or -. 4 Press CLOCK SET once. The minute starts flashing. 5 Repeat steps 3 and 4 to set the minute. Two short beeps sound, and the counting of the seconds starts. If you quit during the clock setting, after about 65 seconds the previous display will return. To set the current time from zero seconds, press CLOCK SET with the time signal in step 5. To change the display to the daylight saving time (summer time) indication Press SUMMER T. D.S.T.. " " is displayed and the time indication changes to summer time. To deactivate the summer time function, press SUMMER T. D.S.T. again. To set the brightness of the backlight Press BRIGHTNESS to select high, middle or low for the display according to your preferences. Playing the Radio -Manual Tuning 1 Press RADIO ON•SLEEP to turn on the radio. The display shows the band and frequency for a few seconds and then changes back to the current time. 2 Press BAND to select the band. Each press changes the band as follows: ICF-C153V AM FM1 FM2 WEATHER ICF-C143 AM FM1 TV FM2 When using FM1 or FM2 preset mode, you may listen to the radio on either mode. (See "Presetting Your Favorite Station".) 3 Press TUNE/TIME SET + or - to tune in to the desired station. Two short beeps sound when the minimum frequency of each band is received during tuning. 4 Adjust volume using VOLUME. To check the station being received Press TUNE/TIME SET + or - lightly. The display shows the band and frequency for a few seconds and then returns to the previous display. To turn off the radio, press OFF•ALARM RESET. Setting the Alarm You can set two types of alarms, radio (ALARM A) and buzzer (ALARM B). The alarm will come on at the same time everyday. Before setting the alarm, make sure to set the clock. (See "Setting the Clock") Notes • The factory setting alarm time for radio (ALARM A) and buzzer (ALARM B) is "AM 12:00". • If you quit during the alarm setting, after about 65 seconds the previous display will return. Improving the Reception TV*/WEATHER*/ FM: Extend the FM wire antenna fully to increase reception sensitivity. * ICF-C153V only AM: Rotate the unit horizontally for optimum reception. A ferrite bar is built in to the unit. Do not operate the unit over a steel desk or metal surface, as this may lead to interference of reception. Presetting Your Favorite Station -Preset Tuning You can preset up to 10 stations in FM (5 stations in FM1, 5 stations in FM2), and 5 stations in each AM, TV*, WEATHER*. * ICF-C153V only Presetting a Station 1 Follow steps 1 to 4 in "Playing the Radio" and manually tune in to the station you wish to preset. 2 Hold down the preset button you wish to preset for more than 2 seconds. Example: Display window when you set FM 90 MHz in the PRESET TUNING 2 button for FM2. The preset number "2" and " the display. Two beeps sound, and "2" and " flashing. " flash in " stop To preset another station, repeat these steps. To change the preset station, tune in to the desired station and hold down the PRESET TUNING 1 to 5 button. The new station will replace the previous station on the preset button. Tuning in to a Preset Station 1 Press RADIO ON•SLEEP to turn on the radio. 2 Press BAND to select the band. 3 Press the desired preset button. 4 Adjust the volume using VOLUME. After a few seconds, the display will return to the current time but the preset button number will remain. Note Holding down the desired PRESET TUNING button for more than a few seconds in step 3 will replace the previous station on the PRESET TUNING button with the station you tuned in to. Setting the Stand by Weather Alert (ICF-C153V only) When the Stand by Weather Alert is set, emergency broadcasting is informed by the buzzer. Make sure to turn the radio off before using this function. 1 Press STAND BY WEATHER ALERT while the radio is not playing. The display shows the received Stand by Weather Alert channel for 10 seconds and then changes to the current time. The previously received Stand by Weather Alert channel will be received. When you set the Stand by Weather Alert for the first time, press TUNE/TIME SET + or - to check the channel available in your residential area, and select that channel. 2 Press STAND BY WEATHER ALERT again. The Stand by Weather Alert will be in a standby mode and the STAND BY WEATHER ALERT indicator lights up. No sound can be heard from the speaker even when the Stand by Weather Alert is in standby mode. To Receive the Emergency Broadcasting When the tone signal is received while the Stand by Weather Alert is on standby A beep sounds for 20 seconds and the STAND BY WEATHER ALERT indicator flashes for 12 hours. At this time, the beep sounds louder than usual. 1 Press STAND BY WEATHER ALERT while the STAND BY WEATHER ALERT indicator flashes. Emergency broadcasting is received. 2 Press STAND BY WEATHER ALERT again to turn off the radio. To return to the usual band reception Press OFF•ALARM RESET to turn off the radio, and then turn on the radio. (See "Playing the Radio") Notes • If the alarm function has started up while the Stand by Weather Alert is in the standby mode, the Stand by Weather Alert will be deactivated temporarily only while the radio or buzzer alarm sounds. • If an invalid key is pressed while the Stand by Weather Alert is functioning, an error beep sounds. To Set the Radio Alarm (ALARM A) 1 Press A RADIO•ALARM SET for a few seconds until a beep sounds. " A RADIO " and the hour flash on the display. 2 Press TUNE/TIME SET + or - to set the desired hour. 3 Press A RADIO•ALARM SET. 4 Repeat steps 2 and 3 to set the minute. A beep sounds to confirm the setting of time. "WAKE UP STA" appears and the preset number flashes on the display. 5 Press TUNE/TIME SET + or - to select the wake up station. Preset number changes in the order as follows: ICF-C153V - AM P1 to 5 FM1 P1 to 5 WEATHER TV P1 to 5 FM2 P1 to 5 P1 to 5 ICF-C143 - AM P1 to 5 FM2 P1 to 5 FM1 P1 to 5 "-" is the last received station. You can directly select the desired wake up station by pressing BAND or the PRESET TUNING button while the indication "-" is not displayed. 6 Press A RADIO•ALARM SET. Two beeps sound to confirm the setting. To use ALARM A, set the alarm mode. (See "Setting the Alarm Mode".) When the alarm comes on at the preset time, " A RADIO " flashes on the display and the wake up station (the station selected in step 5) comes on. The radio is turned off automatically after about 30 minutes (ICF-C153V) or about 60 minutes (ICFC143). To check the alarm setting Press A RADIO•ALARM SET once. The display shows the preset time. If you press A RADIO•ALARM SET again, the display shows the wake up station. To return to the previous display, press CLOCK SET or wait for a few seconds. To Set the Buzzer Alarm (ALARM B) 1 Press B BUZZER•ALARM SET for a few seconds until a beep sounds. " B BUZZER " and the hour flashes on the display. 2 Press TUNE/TIME SET + or - to set the desired hour. 3 Press B BUZZER•ALARM SET. 4 Repeat steps 2 and 3 to set the minute. A beep sounds to confirm the setting of time. 5 Press B BUZZER•ALARM SET again. Two beeps sound to confirm the setting. To use ALARM B, set the alarm mode. (See "Setting the Alarm Mode".) When the alarm comes on at the preset time, " B BUZZER " flashes on the display. The buzzer is turned off automatically after about 30 minutes (ICF-C153V) or about 60 minutes (ICFC143). To check the alarm setting Press B BUZZER•ALARM SET once. The display shows the preset time. To return to the previous display, press CLOCK SET or wait for a few seconds. Setting the Alarm Mode Before setting the alarm mode, be sure to set the alarm time. (See "Setting the Alarm") Press ALARM MODE repeatedly until the desired mode is selected. Each press of ALARM MODE changes the indication on the display as follows: No alarm Indication A RADIO B BUZZER A RADIO B BUZZER If the same alarm time is set for both radio and buzzer alarm (ALARM A and B), the radio alarm (ALARM A) takes priority. To Doze for a Few More Minutes Press SNOOZE/SLEEP OFF. The radio or buzzer turns off but will automatically come on again after about 10 minutes. Every time you press SNOOZE/SLEEP OFF, the snooze time changes as follows: 10 20 30 40 50 60 The maximum length of the snooze time is 60 minutes. The display shows the snooze time for a few seconds and returns to show the current time. When you press SNOOZE/SLEEP OFF after the current time appeared, the snooze time starts from 10 minutes again. Note The SNOOZE/SLEEP OFF button does not function while the Stand by Weather Alert is on standby. To Stop the Alarm Press OFF•ALARM RESET to turn off the alarm. The alarm will come on again at the same time the next day. To Deactive the Alarm Press ALARM MODE repeatedly so that " A RADIO " and " B BUZZER " go off. Using the NAP Timer (Count Down Timer) The NAP timer sounds the buzzer after a preset time duration. Press NAP repeatedly until the desired minutes is displayed. Every press changes the display as follows: OFF (current time) 10 20 30 120 90 60 The NAP indicator turns on, " " and the NAP time is displayed for a few seconds. NAP timer starts counting down the NAP time. When selected NAP time has passed, the beep sound comes on, and the NAP indicator and " " on the display flash. To Stop NAP Timer Press NAP or OFF•ALARM RESET to turn off the buzzer. To Deactive NAP Timer Press NAP. The NAP indicator and " " go off. Setting the Sleep Timer You can enjoy falling asleep to the radio using the built-in sleep timer that turns off the radio automatically after a preset duration. Press RADIO ON•SLEEP. The radio turns on. You can set the sleep timer to durations of 90, 60, 30, or 15 minutes. Every press changes the display as follows: On 90 60 15 30 Two short beeps sound when the display returns to "On". " " will appear in the display when the duration time is set. The radio will play for the time you set, then shut off. To turn off the radio before the preset time Press SNOOZE/SLEEP OFF or OFF•ALARM RESET. To Use Both Sleep Timer and Alarm You can fall asleep to the radio and also be awakened by the radio or buzzer alarm at the preset time. 1 Set the alarm. (See "Setting the Alarm".) 2 Set the sleep timer. (See "Setting the Sleep Timer".) Troubleshooting Should any problem occur with the unit, make the following simple checks to determine whether or not servicing is required. If the problem persists, consult your nearest Sony dealer. The clock does not show the correct time. • Has an electrical power outage lasting more than 1 minutes occurred? The radio or buzzer alarm does not sound at the preset alarm time. • Has the desired radio or buzzer alarm been activated? (i.e. Is " A RADIO " or " B BUZZER " displayed?) The radio alarm is activated but no sound comes on at the preset alarm time. • Has VOLUME been adjusted? The preset stations may be deleted from the memory, if a maintenance service is performed. Please note down your settings in case you want to preset them again. Precautions • Operate the unit only on 120 V AC, 60 Hz. • To disconnect the power cord (mains lead), pull it out the plug, not by the cord. • Do not leave the unit in a location near a heat source such as a radiator or airduct, or in a place subject to direct sunlight, excessive dust, mechanical vibration, or shock. • Do not place the unit on surfaces (rugs, blankets, etc.) or near materials (curtains, draperies) that block the ventilation holes. • Should any liquid or solid object fall into the unit, unplug the unit and have it checked by qualified personnel before operating it further. • When the casing becomes soiled, clean it with a soft cloth dampened with a mild detergent solution. Never use abrasive cleaners or chemical solvents, as they may mar the casing. If you have any questions, please consult your nearest Sony dealer. Specifications Time display 12-hour system Frequency range TV: WEATHER: FM: AM: 2 - 13 ch (ICF-C153V only) 1 - 7 ch (ICF-C153V only) 87.5 - 108 MHz 530 - 1 710 kHz Speaker Approx. 6.6 cm (2 5/8 inches) dia. 8 Ω Power output 170 mW (at 10 % harmonic distortion) Power requirements 120 V AC, 60 Hz Dimensions Approx. 118.5 × 116.5 × 126 mm (w/h/d) (4 3/4 × 4 5/8 × 5 inches) including projecting parts and controls Mass ICF-C153V: Approx. 730 g (1 lb 9.6 oz) ICF-C143: Approx. 715 g (1 lb 9.1 oz) Design and specifications are subject to change without notice.

  • 1
  • 2

INFORMATION
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving
antenna.
—Increase the separation between the
equipment and receiver.
—Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced
radio/TV technician for help.
If you have any questions about the product, you
may call:
Sony Direct Response Center 1-(800)-222-7669 or
write to:
Sony Direct Response Center 12451 Gateway Blvd.
Fort Myers, FL 33913
Declaration of Conformity
Trade Name:
SONY
Model:
ICF-C153V
Responsible Party:
Sony Electronics Inc.
Address:
680 Kinderkamack Road,
Oradell, NJ 07649 USA
Telephone Number:
201-930-6972
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
3-238-577-
21
(1)
TV/WEATHER/FM/AM PLL Synthesized
Clock Radio
ICF-C153V
FM/AM PLL Synthesized
Clock Radio
ICF-C143
Operating Instructions
Manual de instrucciones (en el reverso)
Sony Corporation © 2002
Printed in China
Dream Machine is a trademark of Sony Corporation.
Dream Machine es marca comercial de Sony Corporation.
English
WARNING
To prevent fire or shock hazard, do
not expose the unit to rain or
moisture.
This symbol is intended to alert the user
to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.
This symbol is intended to alert the user
to the presence of important operating
and maintenance (servicing) instructions
in the literature accompanying the
appliance.
The graphical symbols are at the bottom of the
unit.
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
For customers in the USA
Please register this product on line at
http:
/
/www.sony.com/productregistration.
Proper registration will enable us to send you periodic mailings about new products, services, and
other important announcements.
Registering your product will also allow us to contact you in the unlikely event that the product
needs adjustment or modification. Thank you.
Setting the Clock
1
Plug in the unit.
“AM 12:00” flashes on the display.
2
Press
CLOCK SET
for a few seconds until
a beep sounds.
The hour starts to flash on the display.
3
Press
TUNE/TIME SET +
or
until the
correct hour appears.
To set the current time rapidly, hold down
TUNE/TIME SET +
or
.
4
Press
CLOCK SET
once.
The minute starts flashing.
5
Repeat steps 3 and 4 to set the minute.
Two short beeps sound, and the counting of the
seconds starts.
If you quit during the clock setting, after about 65
seconds the previous display will return.
To set the current time from zero seconds, press
CLOCK SET
with the time signal in step 5.
To change the display to the daylight saving
time (summer time) indication
Press
SUMMER T. D.S.T.
.
” is displayed and the time indication changes
to summer time.
To deactivate the summer time function, press
SUMMER T. D.S.T.
again.
To set the brightness of the backlight
Press
BRIGHTNESS
to select high, middle or low for
the display according to your preferences.
Playing the Radio
—Manual Tuning
1
Press
RADIO ON•SLEEP
to turn on the
radio.
The display shows the band and frequency for
a few seconds and then changes back to the
current time.
2
Press
BAND
to select the band.
Each press changes the band as follows:
ICF-C153V
WEATHER
TV
AM
FM1
FM2
ICF-C143
AM
FM1
FM2
When using FM1 or FM2 preset mode, you may
listen to the radio on either mode. (See
Presetting Your Favorite Station
.)
There is a tactile dot beside volume to
show the direction to turn up the volume.
The PRESET TUNING 3 button has
a tactile dot.
VOLUME
AC power cord
FM wire
antenna
ICF-C153V
ICF-C143
ICF-C153V
ICF-C143
ICF-C153V
ICF-C143
3
Press
TUNE/TIME SET +
or
to tune in to
the desired station.
Two short beeps sound when the minimum
frequency of each band is received
during
tuning.
4
Adjust volume using
VOLUME
.
To check the station being received
Press
TUNE/TIME SET +
or
lightly. The display
shows the band and frequency for a few seconds
and then returns to the previous display.
To turn off the radio, press
OFF•ALARM RESET
.
Improving the
Reception
TV*/WEATHER*/ FM:
Extend the FM wire antenna fully to increase
reception sensitivity.
* ICF-C153V only
AM:
Rotate the unit horizontally for optimum
reception. A ferrite bar is built in to the unit.
Do not operate the unit over a steel desk or
metal surface, as this may lead to interference
of reception.
Presetting Your
Favorite Station
—Preset Tuning
You can preset up to 10 stations in FM (5 stations in
FM1, 5 stations in FM2), and 5 stations in each AM,
TV*, WEATHER*.
* ICF-C153V only
Presetting a Station
1
Follow steps 1 to 4 in
Playing the Radio
and manually tune in to the station you
wish to preset.
2
Hold down the preset button you wish to
preset for more than 2 seconds.
Example:
Display window when you set FM
90 MHz in the
PRESET TUNING
2
button for FM2.
The preset number
2
and
flash in
the display.
Two beeps sound, and
2
and
stop
flashing.
To preset another station, repeat these steps.
To change the preset station, tune in to the
desired station and hold down the
PRESET
TUNING 1
to
5
button. The new station will
replace the previous station on the preset
button.
Tuning in to a Preset Station
1
Press
RADIO ON•SLEEP
to turn on the
radio.
2
Press
BAND
to select the band.
3
Press the desired preset button.
4
Adjust the volume using
VOLUME
.
After a few seconds, the display will return to
the current time but the preset button number
will remain.
Note
Holding down the desired
PRESET TUNING
button
for more than a few seconds in step 3 will replace
the previous station on the
PRESET TUNING
button
with the station you tuned in to.
Setting the Stand by
Weather Alert
(ICF-C153V only)
When the Stand by Weather Alert is set, emergency
broadcasting is informed by the buzzer.
Make sure to turn the radio off before using this
function.
1
Press
STAND BY WEATHER ALERT
while the radio is not playing.
The display shows the received Stand by
Weather Alert channel for 10 seconds and then
changes to the current time.
The previously received Stand by Weather
Alert channel will be received.
When you set the Stand by Weather Alert for
the first time, press
TUNE/TIME SET +
or
to
check the channel available in your residential
area, and select that channel.
2
Press
STAND BY WEATHER ALERT
again.
The Stand by Weather Alert will be in a
standby mode and the
STAND BY WEATHER
ALERT
indicator lights up.
No sound can be heard from the speaker even
when the Stand by Weather Alert is in standby
mode.
To Receive the Emergency
Broadcasting
When the tone signal is received while the
Stand by Weather Alert is on standby
A beep sounds for 20 seconds and the
STAND BY
WEATHER ALERT
indicator flashes for 12 hours.
At this time, the beep sounds louder than usual.
1
Press
STAND BY WEATHER ALERT
while the STAND BY WEATHER ALERT
indicator flashes.
Emergency broadcasting is received.
2
Press
STAND BY WEATHER ALERT
again to turn off the radio.
To return to the usual band reception
Press
OFF•ALARM RESET
to turn off the radio, and
then turn on the radio. (See
Playing the Radio
)
Notes
If the alarm function has started up while the
Stand by Weather Alert is in the standby mode,
the Stand by Weather Alert will be deactivated
temporarily only while the radio or buzzer alarm
sounds.
If an invalid key is pressed while the Stand by
Weather Alert is functioning, an error beep
sounds.
Setting the Alarm
You can set two types of alarms, radio (ALARM A)
and buzzer (ALARM B).
The alarm will come on at the same time everyday.
Before setting the alarm, make sure to set the clock.
(See
Setting the Clock
)
Notes
The factory setting alarm time for radio (ALARM
A) and buzzer (ALARM B) is
AM 12:00
.
If you quit during the alarm setting, after about
65 seconds the previous display will return.
To Set the Radio Alarm
(ALARM A)
1
Press
A RADIO•ALARM SET
for a few
seconds until a beep sounds.
A
RADIO
and the hour flash on the display.
2
Press
TUNE/TIME SET +
or
to set the
desired hour.
3
Press
A RADIO•ALARM SET
.
4
Repeat steps 2 and 3 to set the minute.
A beep sounds to confirm the setting of time.
WAKE UP STA
appears and the preset
number flashes on the display.
5
Press
TUNE/TIME SET +
or
to select the
wake up station.
Preset number changes in the order as follows:
ICF-C153V
-
AM P1 to 5
FM1 P1 to 5
FM2 P1 to 5
TV P1 to 5
WEATHER
P1 to 5
ICF-C143
-
AM P1 to 5
FM1 P1 to 5
FM2 P1 to 5
“–”
is the last received station.
You can directly select the desired wake up
station by pressing
BAND
or the
PRESET
TUNING
button while the indication
“–”
is not
displayed.
6
Press
A RADIO•ALARM SET
.
Two beeps sound to confirm the setting.
To use ALARM A, set the alarm mode. (See
Setting the Alarm Mode
.)
When the alarm comes on at the preset time,
A
RADIO
flashes on the display and the wake up
station (the station selected in step 5) comes on.
The radio is turned off automatically after about 30
minutes (ICF-C153V) or about 60 minutes (ICF-
C143).
To check the alarm setting
Press
A RADIO•ALARM SET
once. The display
shows the preset time.
If you press
A RADIO•ALARM SET
again, the
display shows the wake up station.
To return to the previous display, press
CLOCK SET
or wait for a few seconds.
To Set the Buzzer Alarm
(ALARM B)
1
Press
B BUZZER•ALARM SET
for a few
seconds until a beep sounds.
B
BUZZER
and the hour flashes on the display.
2
Press
TUNE/TIME SET +
or
to set the
desired hour.
3
Press
B BUZZER•ALARM SET
.
4
Repeat steps 2 and 3 to set the minute.
A beep sounds to confirm the setting of time.
5
Press
B BUZZER•ALARM SET
again.
Two beeps sound to confirm the setting.
To use ALARM B, set the alarm mode. (See
Setting the Alarm Mode
.)
When the alarm comes on at the preset time,
B
BUZZER
flashes on the display.
The buzzer is turned off automatically after about
30 minutes (ICF-C153V) or about 60 minutes (ICF-
C143).
To check the alarm setting
Press
B BUZZER•ALARM SET
once. The display
shows the preset time.
To return to the previous display, press
CLOCK SET
or wait for a few seconds.
Setting the Alarm Mode
Before setting the alarm mode, be sure to set the
alarm time. (See
Setting the Alarm
)
Press
ALARM MODE
repeatedly until the desired
mode is selected.
Each press of
ALARM MODE
changes the
indication on the display as follows:
No alarm
Indication
A
RADIO
A
RADIO
B
BUZZER
B
BUZZER
If the same alarm time is set for both radio and
buzzer alarm (ALARM A and B), the radio alarm
(ALARM A) takes priority.
To Doze for a Few More
Minutes
Press
SNOOZE/SLEEP OFF
.
The radio or buzzer turns off but will automatically
come on again after about 10 minutes. Every time
you press
SNOOZE/SLEEP OFF
, the snooze time
changes as follows:
10
20
30
40
50
60
The maximum length of the snooze time is 60
minutes.
The display shows the snooze time for a few
seconds and returns to show the current time.
When you press
SNOOZE/SLEEP OFF
after the
current time appeared, the snooze time starts from
10 minutes again.
Note
The
SNOOZE/SLEEP OFF
button does not function
while the Stand by Weather Alert is on standby.
To Stop the Alarm
Press
OFF•ALARM RESET
to turn off the alarm.
The alarm will come on again at the same time the
next day.
To Deactive the Alarm
Press
ALARM MODE
repeatedly so that
A
RADIO
and
B
BUZZER
go off.
Using the NAP Timer
(Count Down Timer)
The NAP timer sounds the buzzer after a preset
time duration.
Press
NAP
repeatedly until the desired minutes is
displayed.
Every press changes the display as follows:
OFF
(current time)
10
20
90
120
60
30
The NAP indicator turns on,
and the NAP
time is displayed for a few seconds.
NAP timer starts counting down the NAP time.
When selected NAP time has passed, the beep
sound comes on, and the NAP indicator and
on the display flash.
To Stop NAP Timer
Press
NAP
or
OFF•ALARM RESET
to turn off the
buzzer.
To Deactive NAP Timer
Press
NAP
.
The NAP indicator and
go
off.
Setting the Sleep
Timer
You can enjoy falling asleep to the radio using the
built-in sleep timer that turns off the radio
automatically after a preset duration.
Press
RADIO ON•SLEEP
.
The radio turns on. You can set the sleep timer to
durations of 90, 60, 30, or 15 minutes. Every press
changes the display as follows:
On
90
60
30
15
Two short beeps sound when the display returns to
On
.
will appear in the display when the
duration time is set.
The radio will play for the time you set, then shut
off.
To turn off the radio before the preset time
Press
SNOOZE/SLEEP OFF
or
OFF•ALARM RESET
.
To Use Both Sleep Timer and
Alarm
You can fall asleep to the radio and also be
awakened by the radio or buzzer alarm at the
preset time.
1
Set the alarm. (See
Setting the Alarm
.)
2
Set the sleep timer. (See
Setting the Sleep
Timer
.)
Troubleshooting
Should any problem occur with the unit, make the
following simple checks to determine whether or
not servicing is required.
If the problem persists, consult your nearest Sony
dealer.
The clock does not show the correct time.
Has an electrical power outage lasting more than
1 minutes occurred?
The radio or buzzer alarm does not sound at the
preset alarm time.
Has the desired radio or buzzer alarm been
activated? (i.e. Is
A
RADIO
or
B
BUZZER
displayed?)
The radio alarm is activated but no sound comes
on at the preset alarm time.
Has
VOLUME
been adjusted?
The preset stations may be deleted from the
memory, if a maintenance service is performed.
Please note down your settings in case you want to
preset them again.
Precautions
Operate the unit only on 120 V AC, 60 Hz.
To disconnect the power cord (mains lead), pull it
out the plug, not by the cord.
Do not leave the unit in a location near a heat
source such as a radiator or airduct, or in a place
subject to direct sunlight, excessive dust,
mechanical vibration, or shock.
Do not place the unit on surfaces (rugs, blankets,
etc.) or near materials (curtains, draperies) that
block the ventilation holes.
Should any liquid or solid object fall into the unit,
unplug the unit and have it checked by qualified
personnel before operating it further.
When the casing becomes soiled, clean it with a
soft cloth dampened with a mild detergent
solution. Never use abrasive cleaners or chemical
solvents, as they may mar the casing.
If you have any questions, please consult your
nearest Sony dealer.
Specifications
Time display
12-hour system
Frequency range
TV:
2
13 ch (ICF-C153V only)
WEATHER:
1
7 ch (ICF-C153V only)
FM:
87.5
108 MHz
AM:
530
1 710 kHz
Speaker
Approx. 6.6 cm (2
5
/
8
inches) dia. 8
Power output
170 mW (at 10 % harmonic distortion)
Power requirements
120 V AC, 60 Hz
Dimensions
Approx. 118.5
×
116.5
×
126 mm (w/h/d)
(4
3
/
4
×
4
5
/
8
×
5 inches) including projecting
parts and controls
Mass
ICF-C153V:
Approx. 730 g (1 lb 9.6 oz)
ICF-C143:
Approx. 715 g (1 lb 9.1 oz)
Design and specifications are subject to change
without notice.
Before You Begin
Thank you for choosing the Sony Dream Machine.
The Dream Machine will give you many hours of
reliable service and listening pleasure.
Before operating your unit, please read these
instructions thoroughly and retain them for future
reference.
These instructions cover the models ICF-C153V
and ICF-C143, and their difference is as follows:
Model Number
ICF-C153V
ICF-C143
Band
TV/WEATHER/
FM/AM
FM/AM
Features
TV/WEATHER/FM/AM 4 band (ICF-C153V) or
FM/AM 2 band (ICF-C143) PLL (phase locked
loop) synthesized clock radio
Stand by Weather Alert call you if you set the
standby weather alert
mode (ICF-C153V only).
Easy Preset Digital Tuning with 25 memory
presets for ICF-C153V, 15 memory presets for
ICF-C143
Easy nap timer
one push operation.
Dual Alarm (radio and buzzer) with the
extendable snooze function.
LCD with backlight which has a brightness
control switch (high/middle/low).
D.S.T. (Daylight Saving Time)
Summer time
calculation