Sony ILCE-3000K/BM Instruction Manual - Page 11
Connection plate cover, Tripod socket hole, Speaker, Battery cover 13, Battery compartment 13
View all Sony ILCE-3000K/BM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Preparing the camera B Tripod socket hole • Use a tripod with a screw length of less than 5.5 mm (7/32 inch). You will be unable to firmly secure the camera to tripods using screws longer than 5.5 mm (7/32 inch), and may damage the camera. C Speaker D Battery cover (13) E Battery compartment (13) F Lock lever (13, 17) A Connection plate cover Use this when using an AC-PW20 AC Adaptor (sold separately). Insert the connection plate into the battery compartment, and then pass the cord through the connection plate cover as shown below. • Make sure that the cord is not pinched when you close the cover. GB 11
GB
11
Preparing the camera
A
Connection plate cover
Use this when using an AC-PW20
AC Adaptor (sold separately).
Insert the connection plate into the
battery compartment, and then pass
the cord through the connection
plate cover as shown below.
•
Make sure that the cord is not
pinched when you close the
cover.
B
Tripod socket hole
•
Use a tripod with a screw length
of less than 5.5 mm
(7/32 inch). You will be unable to
firmly secure the camera to
tripods using screws longer than
5.5 mm (7/32 inch), and may
damage the camera.
C
Speaker
D
Battery cover (13)
E
Battery compartment (13)
F
Lock lever (13, 17)