Sony ILCE-6300M Operating Instructions 1 - Page 17

x Supplying power You can use the camera while power is supplied from a wall outlet (wall socket) by using the AC Adaptor (supplied). Notes • The camera will not activate if there is no remaining battery. Insert a sufficiently charged battery pack into the camera. • If you use the camera while power is being supplied from a wall outlet (wall socket), make sure that the icon ( ) displays on the monitor. • Do not remove the battery pack while power is being supplied from a wall outlet (wall socket). If you remove the battery pack, the camera will turn off. • Do not remove the battery pack while the access lamp (page 12) is lit. The data on the memory card may be damaged. • As long as the power is on, the battery pack will not be charged even if the camera is connected to the AC Adaptor. • Under certain usage conditions, the battery power may be consumed as a backup even when the camera is connected to the AC Adaptor while being used. • Do not remove the micro USB cable while power is being supplied via USB connection. Before you remove the micro USB cable, turn off the camera. • While power is being supplied via USB connection, the temperature inside the camera will rise and the continuous recording time may be shortened. • When using a mobile charger as a power source, confirm that the mobile charger is fully charged before use. Also, be careful of the remaining power on the mobile charger during use. GB 17