Sony ILCE-7M3K Operating Instructions - Page 55

Using a computer, Connecting the camera to a computer, Connecting to a computer

Get Sony ILCE-7M3K PDF manuals and user guides View all Sony ILCE-7M3K manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Using a computer Using a computer Connecting the camera to a computer Connecting to a computer 1 Insert a sufficiently charged battery pack into the camera. 2 Turn on the camera and the computer. 3 Check that [USB Connection] under (Setup) is set to [Mass Storage]. 4 Connect the camera to the computer using the USB cable. ••When you connect the camera to the computer for the first time, the procedure for recognizing the camera may start automatically on the computer. Wait until the procedure is finished. ••If you connect the camera to your computer using the USB cable when [USB Power Supply] is set to [On], power is supplied from your computer. (Default setting: [On]) ••Use a USB 3.1-compatible computer and the USB Type-C cable (sold separately) for higher-speed communications. To a USB terminal USB cable To the Multi/Micro USB Terminal GB 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
GB
55
Using a computer
Using a computer
Connecting the camera to a computer
Connecting to a computer
1
Insert a sufficiently charged battery pack into the camera.
2
Turn on the camera and the computer.
3
Check that [USB Connection] under
 
(Setup) is set to
[Mass Storage].
4
Connect the camera to the
computer using the USB cable.
• When you connect the
camera to the computer for
the first time, the procedure
for recognizing the camera
may start automatically on
the computer. Wait until the
procedure is finished.
• If you connect the camera to
your computer using the USB
cable when [USB Power Supply]
is set to [On], power is supplied
from your computer. (Default
setting: [On])
• Use a USB 3.1-compatible
computer and the USB Type-C
cable (sold separately) for
higher-speed communications.
To the Multi/Micro
USB Terminal
USB cable
To a USB
terminal