Sony ILCE-7M3K Help Guide - Page 158

Help Guide Interchangeable Lens Digital Camera ILCE-7M3 α7III Manual Exposure You can shoot with the desired exposure setting by adjusting both the shutter speed and aperture. 1 Set the mode dial to M (Manual Exposure). 2 Select the desired aperture value by turning the front dial. Select the desired shutter speed by turning the rear dial. You can change the setting of the front/rear dial using MENU → (Camera Settings2) → [Dial Setup]. You can also set [ISO] to [ISO AUTO] in manual exposure mode. The ISO value automatically changes to achieve the appropriate exposure using the aperture value and shutter speed you have set. When [ISO] is set to [ISO AUTO], the ISO value indicator will blink if the value you have set is not suitable for appropriate exposure. If this happens, change the shutter speed or aperture value. When [ISO] is set to other than [ISO AUTO], use MM (Metered Manual)* to check the exposure value. Toward +: Images become brighter. Toward -: Images become darker. 0: Appropriate exposure analyzed by the product. * Indicates under/over for appropriate exposure. It is displayed using a numerical value on the monitor and with a metering indicator on the viewfinder. 3 Adjust the focus and shoot the subject. Hint You can change the shutter speed and aperture (F-value) combination without changing the set exposure value by rotating the front/rear dial while pressing the AEL button. (Manual shift) Note The Metered Manual indicator does not appear when [ISO] is set to [ISO AUTO]. When the amount of ambient light exceeds the metering range of the Metered Manual, the Metered Manual indicator flashes. The SteadyShot warning indicator does not appear in manual exposure mode. The brightness of the image on the screen may differ from the actual image being shot. 4-732-947-14(1) Copyright 2018 Sony Corporation 158