Sony ILCE-7RM4 Operating Instructions - Page 58

Using a computer, Connecting the camera to a computer, Connecting to a computer

Get Sony ILCE-7RM4 PDF manuals and user guides View all Sony ILCE-7RM4 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

Using a computer Connecting the camera to a computer Connecting to a computer 1 Insert a sufficiently charged battery pack into the camera. 2 Turn on the camera and the computer. 3 Check that [USB Connection] under (Setup) is set to [Mass Storage]. 4 Connect the camera to the computer using the USB cable. ••When you connect the camera to the computer for the first time, the procedure for recognizing the camera may start automatically on the computer. Wait until the procedure is finished. ••If you connect the camera to your computer using the USB cable when [USB Power Supply] is set to [On], power is supplied from your computer. (Default setting: [On]) ••Use the USB Type-C cable (supplied) or a USB-standard cable. ••Use a USB 3.2-compatible computer and the USB Type-C cable (supplied) for higherspeed communications. To a USB terminal To the USB Type-C terminal USB cable GB 58

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
GB
58
Using a computer
Connecting the camera to a computer
Connecting to a computer
1
Insert a sufficiently charged battery pack into the camera.
2
Turn on the camera and the computer.
3
Check that [USB Connection] under
 
(Setup) is set to
[Mass Storage].
4
Connect the camera to the
computer using the USB cable.
• When you connect the
camera to the computer for
the first time, the procedure
for recognizing the camera
may start automatically on
the computer. Wait until the
procedure is finished.
• If you connect the camera to
your computer using the USB
cable when [USB Power Supply]
is set to [On], power is supplied
from your computer. (Default
setting: [On])
• Use the USB Type-C cable
(supplied) or a USB-standard
cable.
• Use a USB 3.2-compatible
computer and the USB Type-C
cable (supplied) for higher-
speed communications.
To the USB Type-C
terminal
USB cable
To a USB
terminal