Sony ILCE-7SM3 Help Guide - Page 423

Help Guide Interchangeable Lens Digital Camera ILCE-7SM3 α7SIII One-touch connection with NFC You can connect the camera to an NFC-enabled smartphone by touching them together. To connect the camera and your smartphone, Imaging Edge Mobile is required. Download and install the application Imaging Edge Mobile from your smartphone's application store. If Imaging Edge Mobile is already installed on your smartphone, be sure to update it to the latest version. For details on Imaging Edge Mobile, refer to the support page (https://www.sony.net/iem/). 1 Activate the NFC function of the smartphone. On an iPhone, launch Imaging Edge Mobile, and then select [Connect with a new camera] → [Connect with the camera through One-touch (NFC)] to activate the NFC function. 2 Prepare the camera. When using your smartphone as a remote controller: Set MENU → (Network) → [Transfer/Remote] → [Ctrl w/ Smartphone] → [Ctrl w/ Smartphone] → [On], and set the camera to the shooting screen. When transferring images to your smartphone: Set the camera to the playback screen, and display the image you want to transfer. 3 Keep touching the smartphone to the camera for 1 to 2 seconds. The smartphone and the camera are connected. About "NFC" NFC is a technology that enables short-range wireless communication between various devices, such as mobile phones or IC tags, etc. NFC makes data communication simpler with just a touch on the designated touch-point. NFC (Near Field Communication) is an international standard of short-range wireless communication technology. Note If you cannot make a connection, do as the following: Launch Imaging Edge Mobile on your smartphone, and then move the smartphone slowly toward the camera. If the camera or smartphone is in a case, remove it. Check whether the NFC function is activated on your smartphone. 423 (N-Mark) of this