Sony ILCE-7SM3 Help Guide - Page 427

Hint For connection methods other than using the QR code, refer to "Related Topic" at the bottom of this page. Note You can select an image size to be sent to the smartphone from [Original], [2M] or [VGA]. To change the image size, refer to the following steps. For Android smartphone Start Imaging Edge Mobile, and change the image size by [Settings] → [Copy Image Size]. For iPhone/iPad Select Imaging Edge Mobile in the setting menu, and change the image size by [Copy Image Size]. RAW images are converted to JPEG format when they are sent. Depending on the smartphone, the transferred movie may not be played back correctly. For example, the movie may not play smoothly, or there may be no sound. Depending on the format of the still image, movie, slow-motion movie, or quick-motion movie, it may not be possible to play it back on a smartphone. This product shares the connection information for [Send to Smartphone] with a device that has permission to connect. If you want to change the device that is permitted to connect to the product, reset the connection information by following these steps. MENU → (Network) → [Wi-Fi] → [SSID/PW Reset]. After resetting the connection information, you must register the smartphone again. When [Airplane Mode] is set to [On], you cannot connect this product and the smartphone. Set [Airplane Mode] to [Off]. Related Topic Functions available with a smartphone (Imaging Edge Mobile) Connecting the camera and a smartphone using the QR Code Connecting the camera and a smartphone using the SSID and password One-touch connection with NFC Sending Target (proxy movies) Airplane Mode 5-021-326-11(2) Copyright 2020 Sony Corporation 427