Sony KDE-42XBR950 Instructions for stand (primary manual) - Page 6
Instractions, Install the Main Bracket - installation
View all Sony KDE-42XBR950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Check the parts Name Main bracket Quantity Name Countersink screw Stand 1 Securing screw Quantity 10 2 1 Cable clamper 1 Prepare a Phillips screwdriver beforehand. Install the main bracket Align the main bracket over the screw holes on the stand. Then fasten the main bracket to the stand using 10 countersink screws. Be sure that two or more persons hold the parts during this procedure. Tighten the 10 countersink screws once again after screwing them temporarily. Note Be sure to hold the stand firmly and keep it stable. Main bracket Caution When using an electric screwdriver, set the torque setting to about 2.45N·m. Do not use an impact driver. If you use an impact driver or an electric screwdriver with the torque setting out of the specified range, screws may be excessively tightened, which may damage the screws or product. The stand may fall and serious injury may result. Countersink screws Stand 6 (US)