Sony KDE-42XBR950 Instructions for stand (primary manual) - Page 8

2 Be sure that two or more persons hold the right and left edges of the top and the under sides of the Display Unit while fitting the hooks on the rear of the Display Unit into the holes on the fixtures of the stand. Then confirm that the hooks on the rear of the Display Unit are completely inserted into the four holes of the fixtures. Note Do not stumble over the AC power cord or the Display Interface Cable. Rear side of the Display Unit 3 Slide the Display Unit straight downward until it snaps on. Notes • Slide the Display Unit completely down to the bottom. Confirm that the Display Unit is installed on the stand horizontally. • Be sure to keep the Tabletop Stand stable while installing the Display Unit. All models Hook All models 2 Attach the Display Unit to the stand with the two securing screws. Side View Securing screws 8 (US) All models