Sony KDE-50XS955 Instructions (SU-PW3M Wall-Mount Bracket) - Page 10
Step 5: Install the TV, Changing the position of the, woofer speaker., Remove four screws on the rear - 50
View all Sony KDE-50XS955 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
3 Remove four screws on the rear side of the TV. Step 5: Install the TV 4 Attach the supplied four hooks with the four supplied screws (+PSW5 × L14). Notes • When using an electric screwdriver, set the torque setting to approximately 2 N·m. • Do not place the TV face down for an extended period as damage may occur to the front surface. WARNING Be sure to complete the installation before connecting the AC power cord to the wall outlet. If you allow the AC power cord to be pinched under or between pieces of equipment, this may result in a short circuit or an electric shock. Be careful not to stumble over the AC power cord or the TV, as you may hurt yourself. 1 When installing a 50-inch TV on the Wall- Mount Bracket SU-PW3M, you need to change the position of the woofer speaker. Changing the position of the woofer speaker. 1 Loosen the four screws (two on each side of the strut arms) used to secure the woofer speaker in place about three turns. 2 Slide the woofer speaker upward completely as shown below. 3 Retighten the four screws (loosened in step 1) to secure the woofer speaker. Loosen (but do not remove) the screws. Soft rag Note If you fail to slide the woofer speaker completely in step 2, the woofer speaker joint locating at the center bottom of the rear side of the TV and ventilation holes will be blocked resulting in product damage. 10 (US)