Sony KDE-50XS955 Instructions (SU-PW3M Wall-Mount Bracket) - Page 12
Confirm the completion of the installation, Check the following points. - no power
View all Sony KDE-50XS955 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
4 Install the Mounting Rack (with the TV) onto the Plate Unit. 1 Hold the Mounting Rack so that the two center notches on either side touch the support braces of the Plate Unit. 2 Gradually lift the Mounting Rack and TV upward keeping the center notches engaged with the support braces of the Plate Unit. Hitch the upper left and right hooks of the Mounting Rack onto the anchor bars at the top of the left and right stabilizer arms of the Plate Unit. 3 Confirm the four upper hooks are firmly hooked onto the two anchor bars of the Plate Unit and that the support braces are secured in the center notches of the Mounting Rack. 4 Firmly tighten all four upper and lower screws (+B6 × L20, supplied) on each side of the Mounting Rack. 2 Mounting Rack 1 Side view Plate Unit 2 Mounting Rack with the TV 1 Support brace Right side 4 Screws (+B6 × L20, supplied) Confirm the completion of the installation Check the following points. • Four upper hooks of the Mounting Rack are firmly hooked onto the two anchor bars of the Plate Unit. • The cord and the cable are not twisted or pinched. • All the securing screws (+B6 × L20, supplied) are tightened. WARNING Incomplete installation may cause the product falling and result in injury or product damage. Also, improper placement of the AC power cord, etc., may cause fire or electric shock through a short circuit. Be sure to confirm the completion of the installation for safety. 12 (US)