Sony KDE-50XS955 Operating Instructions - Page 119
General, Cannot operate Menu
View all Sony KDE-50XS955 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
General Problem Possible Remedies How to reset TV to factory s Turn on the TV. While holding down the RESET button on the remote control, settings press the POWER button on the right side of the TV. (The TV will turn itself off, then back on again.) Release the RESET button. How to restore Video settings to s Press the RESET button on the remote control while in the Video Menu (see page factory settings 92). How to restore Audio settings to s Press the RESET button on the remote control while in the Audio Menu (see page factory settings 95). Cannot cycle through the other s Be sure the Label Video Inputs option is not set to Skip (see page 105). video equipment connected to the TV Cannot operate Menu s If a Menu option appears in gray, this indicates that the TV is in a state in which the Menu option is not available. Lost password s In the password screen (see page 101), enter the following master password: 4357. The master password clears your previous password; it cannot be used to temporarily unblock channels. TIMER LED on front panel is lit s The LED (see page 16) blinks when the TV is turned on, then shuts off when the picture is displayed. If the LED blinks continuously, this may indicate the TV needs service. When lit, indicates that the timer is set (page 107). When the timer is set, this LED will remain lit even when the TV is turned off. Digital cable box does not work s If you are connecting a VCR and digital cable box using a splitter, as described on page 32, you must use a special bi-directional splitter that is designed to work with your digital cable box. Contact your cable TV company for details. Cannot record digital channels s Only analog channels can be recorded to your VCR. to VCR Other Info Other Info 117