Sony KDE-55XBR950 Operating Instructions - Page 25
Installing the TV
View all Sony KDE-55XBR950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Installing the TV Disconnect all power sources before making any connections. 1 Connect the display interface cable (supplied) to the DISPLAY SIGNAL IN jack, and the AC power cord (supplied) to the AC IN jack of the unit. KDE42XBR950 KDE50XBR950 KDE61XBR950 KDE55XBR950 Setup SONY EXCLUSIVE CABLE ONLY BLACK WHITE DISPLAY SIGNAL IN AC IN Display interface cable (supplied) Tighten the screw slowly until the screw is stabilized. AC power cord (supplied) AC IN SONY EXCLUSIVE CABLE ONLY BLACK WHITE DISPLAY SIGNAL IN AC power cord (supplied) Display interface cable (supplied) Tighten the screw slowly until the screw is stabilized. Do not tighten the screws too much. It may damage the screws. Insert the connector until you hear a click. (Both sides of the connector should be held securely by the clips.) After connecting, make sure the connectors are firmly plugged in and can not easily be pulled out. Refer to the optional accessory's instruction manual for proper cable installation. PDM-5510 is only compatible with MBD55XBR950 for the best picture quality. When setting up the TV, please clarify the correct combination of the display unit and the media receiver unit. (Continued) 23