Sony KDF 50WE655 Operating Instructions - Page 58

Setting Up the LCD Projection TV Setting Up the LCD Projection TV Channel List After you finish connecting the TV, you need to run the Initial Setup feature, which automatically creates a list of available analog and digital channels. The Initial Setup screens appear when you turn on your TV for the first time after hooking it up. If you do not want to set up the channels at this time, you can do it later by selecting the Auto Program option in the Channel menu (see page 106). ✍ The Initial Setup feature does not apply for installations that use a cable box for all channel selection. Using Initial Setup To run Initial Setup the first time you turn on your TV z If you are using a CableCARD, Auto 1 Press POWER to turn on the TV. Program is disabled for The Initial Setup screen appears. the CABLE input. 2 Press V or v to select the on-screen display language. Then press . The message "Start auto program now?" appears. 3 Press V or v to select "Yes", then press only. Initial Setup automatically creates a list of receivable channels. When finished, the lowest numbered channel is displayed. To run Auto Program again at a later time ❑ Use the Auto Program feature as described on page 106. To add individual digital channels ❑ Use the Digital Channels feature as described on page 106. ✍ Auto Program may take up to 50 minutes to complete. A progress bar is displayed while the channel list is being created. 58