Sony KDL-26ML130 Instructions (SU-WL100 Wall-mount Bracket) - Page 11
Confirming the completion of the installation, When removing the TV, Specifications, Confirming
View all Sony KDL-26ML130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Confirming the completion of the installation 3 Be sure to hold the TV and slide it upward to remove the TV. Check the following points. • The hooks of the Mounting Hook are firmly latched in the holes of the Base Plate. • The cord and the cable are not twisted or pinched. • The two screws that secure the Mounting Hook and the Base Plate are securely tightened. WARNING Do not adjust the angle of the Mounting Hook when the TV is installed on the wall and be sure to install completely. It may cause the product to fall and result in injury or product damage. Also, improper placement of the AC power cord, etc., may cause fire or electric shock through a short circuit. Be sure to confirm the completion of the installation for safety. When removing the TV To Sony Dealers 1 Unplug the AC power cord from the wall outlet. CAUTION • Be careful not to allow the cord and cables to get caught when removing the TV. • Be careful not to hurt your hands or fingers when removing the TV. Specifications Unit: mm (inches) Weight: 1.2 kg (2 lb 11 oz) 250 (9 7/8) 60 (2 3/8) 140 (5 5/8) 2 Remove the two screws which secure the TV and the Base Plate. (Refer to 3 of Step 6 on page 10 for the screw positions.) Design and specifications are subject to change without notice. 11 (GB)