Sony KDL-32M3000 Operating Instructions - Page 11

Getting Started Getting Started 1. Installing the TV ~ • The Table-Top Stand for this product is packaged separately (for models KDL-26M3000/KDL-26ML130/ KDL-37M3000). To install the TV unit to the Table-Top Stand before the connection and setup, refer to the Table-Top Stand instructions (supplied with the TV set). Preventing the TV from Toppling Over TV stand Table-Top Stand Bundling the Connecting Cables You can bundle the connecting cables as illustrated below. 2 3 1 1 Screw the support belt (supplied) to the TV stand (not supplied) with a wood screw (supplied). 2 Attach the support belt to the Table-Top Stand with the securing screw (supplied) using a coin, etc. 3 Adjust the length by pulling the support belt toward you while holding the Table-Top Stand. ~ • Be sure to take measures to prevent the TV from toppling over and causing injury. • The supplied wood screw may not be used depending on the type of TV stand. In this case, or when the securing strength is not enough, use commercial screws 1/8 to 3/16 inch (3 to 4 mm) diameter to fit to the TV stand. Consult your dealer about the types of screw(s). 1 2 ~ • Do not bundle the AC power cord with other connecting cables. 11