Sony KDL-52V4100 Service Manual - Page 54
Using the Remote Commander to View Service Data, 2-5. Resetting to Factory Defaults, MUTING - factory reset
UPC - 027242736177
View all Sony KDL-52V4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
KDL-52V4100/52W4100 2-4. USING THE REMOTE COMMANDER TO VIEW SERVICE DATA Use the buttons on the Remote Commander to access the service menu items and adjust the data values. 1. Access Service Mode. Press the following buttons on the Remote Commander within a second of each other: DISPLAY Channel 5 Volume + POWER . Category Adjustment Item TV POWER Category Number Adjustment Item Number TVLF CHECK 001 COLOR ADJ 001 R_DRV SERVICE 00100 Data Value DIGITAL PROGRAM : H801.03 0070 DATA : S001000 BE PROGRAM : TM1.000 NVM : TD1.000 PACK : TP1.000 BOOT : TB1.000 The screen displays the first category in the selected service menu. NOTE: If the Service Menu display text is not completely visible, press the Menu HOME button on the Remote Commander to refresh the display. 2. To change the category, press 2 or 5 on the Remote Commander. Note: Pressing 2 or 5 only changes the categories within the service menu displayed. To change a category on one of the other service menus, press the JUMP button until the correct service menu is displayed. 3. To change the adjustment item, press 1 or 4 on the Remote Commander. 4. To exit service mode, turn the power off. Next item 1 2 Next Category Previous 4 item Read data from last saved NVM MUTING Write into memory 0 5 Previous Category 8 Restore User Control and Channel Memory RM-YD023 ENT JUMP Displays Service Menus 2-5. RESETTING TO FACTORY DEFAULTS Use the following instructions to restore the User Controls and Channel Memory settings to the preset factory conditions. 1. While holding down the on the Remote Commander, press the POWER button on the Front Panel of the set. The set restarts and displays the initial setup screen. This may take several minutes. KDL-52V4100/52W4100 54