Sony LFB10 Operating Instructions - Page 14
Setup 2: Connecting Other Devices, Connect external devices to the Base Station with an A/V cable
View all Sony LFB10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Setup and Connections Setup 2: Connecting Other Devices Connect external devices to the Base Station with an A/V cable You can connect external devices featuring an A/V output terminal, such as a VCR, AV receiver, DVR, DVD player/recorder, or digital cable, to the Base Station. Refer to the operating instructions for each device. Base Station rear panel to the audio/video output terminals or S VIDEO OUT OUT VIDEO L AUDIO R The OUT terminal outputs the signal input from the IN 1 terminal. IR BLASTER 1 2 LAN S VIDEO OUT IN OUT VIDEO L AUDIO R DC IN 12V IN 1 VIDEO L AUDIO R IN 2 VIDEO L AUDIO R S-video and A/V cable (not supplied) If your VCR is not equipped with an S-video jack, use a standard audio/video cable IN (e.g., VMC-810S, not supplied). IN 1 VIDEO L AUDIO R IN 2 VIDEO L AUDIO R You can also connect to the IN 2 terminal. or Audio/video signal flow Watching video with a connected device Open the [Index] window, select [Video 1] or [Video 2] according to the input terminal to which the device is connected. z Tip To operate external devices from the LocationFree device, you must connect the supplied IR Blaster. For details, see the next page. Note If you connect a DVD player to the Base Station via a VCR, the VCR's copy guard function may distort or dim the DVD picture. Connect the DVD player directly to the video input terminal on the Base Station. 14