Sony LFB10 Operating Instructions - Page 35

Base Station Settings Problem Cannot open the [Base Station Settings] screen. Authentication of the user name and password for opening the setup screen fails. Forgot the password for opening the setup screen. Cannot open the [Base Station Settings] page right after setting. Causes and remedies • [Base Station Settings] cannot be clicked when the Base Station and computer are not on the same LAN. • If a global IP address is assigned to your device, you cannot open the [Base Station Settings] page with the device at the time of purchase. Assign a private IP address, such as 192.168.1.xx, to your device, and then click [Base Station Settings]. • When connecting the Base Station to a network that requires a proxy, click [LAN Settings] under [Local Area Network (LAN) settings] on the [Connections] tab of [Internet Options] in Internet Explorer, then click [Advanced] and set the IP address of the Base Station as an address that does not use a proxy. • If you set the wrong IP address to your Base Station connecting with a wired LAN, you cannot connect to the Base Station any more. In this case, change the settings by connecting to the Base Station directly with wireless or, initialize the Base Station (1 page 33). • Did you enter the correct user name? The user name is lfx (lowercase letters). • Did you enter the correct password? The default LoginPassword is printed on the label on the side of the Base Station and on the sticker attached to the "Quick Start Guide". • Did you enter uppercase letters instead of lowercase letters, or vice versa? The Base Station distinguishes between uppercase and lowercase letters. • The default password is printed on the label on the side of the Base Station and on the sticker attached to the "Quick Start Guide". • If you changed the password and forgot the new password, the Base Station will need to be initialized (1 page 33). After initializing the Base Station, enter the password printed on the label on the side of the Base Station. Click [Base Station Settings] of LocationFree Player again to open the [Base Station Settings] page. NetAV check Problem NETWORK LED of the Base Station does not light up. The SETUP MODE/NET AV LED lights amber. The [NetAV Check] page does not appear. NetAV LED stays green. NetAV check has failed. Causes and remedies Check the "NETWORK LED on the Base Station does not turn on" (1 page 34) section of "Base Station." The automatic NetAV check has failed. Start the LocationFree Player, click of the Base Station you want to set, click [Base Station Settings], and then perform NetAV check manually to check the cause of the problem by following the instructions on the screen (1 page 22). Check the "NETWORK LED on the Base Station does not turn on" (1 page 34) section of "Base Station." Another device is connected to the Base Station. Follow the instructions on the NetAV check screen to check the settings, and then perform NetAV check again. Others • For questions about Internet connections, contact your Internet Service Provider (ISP) or cable TV company. • LocationFree Support web site: sony.com/locationfree/faq/ 35