Sony MHC-RXD5 Operating Instructions - Page 37

Connecting audio, components

Page 37 highlights

Optional components Connecting audio components Select one of the following two connections, depending on the equipment to be connected and method of connecting. Refer to the instructions of each component. Connecting an MD deck for digital recording You can record from CD into the MD deck digitally by connecting an optical cable. Connecting an MD deck for analog recording Make sure to match the color of the plugs and the connectors. To listen to the sound of the connected MD deck, press FUNCTION repeatedly until "MD" appears. To the audio output To the audio input of the MD deck of the MD deck To the DIGITAL IN jack of the MD deck Optical Cover Holder Tip Keep the optical cover at the slot provided. Tip When you connect a Sony MD deck, you can use the MD (, P, and p buttons on this unit's remote to perform play, pause, and stop operations. Note If you cannot select "MD" even when you have pressed FUNCTION, press while holding down FUNCTION when the power is turned off. "VIDEO" will be switched to "MD". To return to "VIDEO" do the same procedure. continued 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

37
Connecting audio
components
Select one of the following two connections,
depending on the equipment to be connected
and method of connecting. Refer to the
instructions of each component.
Connecting an MD deck
for digital recording
You can record from CD into the MD deck
digitally by connecting an optical cable.
To the DIGITAL IN jack of the MD deck
To the audio input
of the MD deck
To the audio output
of the MD deck
Optional components
Connecting an MD deck
for analog recording
Make sure to match the color of the plugs and
the connectors. To listen to the sound of the
connected MD deck, press FUNCTION
repeatedly until “MD” appears.
Tip
When you connect a Sony MD deck, you can use the
MD
(
,
P
, and
p
buttons on this unit’s remote to
perform play, pause, and stop operations.
Note
If you cannot select “MD” even when you have
pressed FUNCTION, press
while holding
down FUNCTION when the power is turned off.
“VIDEO” will be switched to “MD”. To return to
“VIDEO” do the same procedure.
continued
Tip
Keep the optical cover at the slot provided.
Optical Cover Holder